Search

Please note that included calipers are supplied bare natural dark grey. Our local powdercoaters are still unable to take on new work, so you will have to take care of different colors on your side.

Fits GRN225 (1GR-FE Access Cab, X-Runner), TRN220, and TRN225 chassis' (2TR-FE, Regular Cab and Access Cab) 5 lug 2005-2015 Tacoma!

Includes:

• Brand new OEM Lexus calipers (not cheapo knockoffs!)
• 5 lug 2nd gen Tacoma specific mounting brackets 
• Mounting hardware
• Brake pads, pins, and clips
• Cross drilled rotors
• Braided brake lines

Us 5 lug Tacoma owners really get the short end of the stick. The 6 lug 4WD trucks all got a decent 4 piston brake setup, whereas ours is almost the same size as the Camry. This issue is compounded for X-Runner guys, especially with boost on top!

From the success of our brake kits for the RWD Lexus cars (GS, SC, LS, etc), we have adapted and implemented a similar complete bolt on kit for the 2005-2015 Tacoma 2WD trucks, including X-Runner, excluding PreRunner. All 5 lug trucks.

The XAT Racing Lexus Brake Upgrade Kit comes with everything you need to bolt on this new brake setup, short of your favorite brake fluid. That includes calipers (optionally, also can be powdercoated as pictured), rotors, pads, pins, anti-rattle springs, mounting hardware, brackets, and stainless braided lines. 

Calipers are sourced from a 2007-2020 LS460, LS460L, LS600h, and even the new LS500 4 piston fronts, RWD non-sport package K17 style. We typically source brand new OEM Lexus/Advics. You also do NOT need the roll center adjusters we make to install on a Tacoma! This listing includes everything else you need for 100% bolt on and go!

For discs, we typically use off-the-shelf preferred DFC/R1 (since StopTech went out of business) 2008-2014 IS-F 360mm (14.2 inch) rotors. They come cross drilled from the factory (just like the IS-F rotors are), though we have other bolt on options as well if you're going for a different style or preference. We've not heard of any issues with rotor cracking like some other aftermarket applications have reported.

Made in the USA!

Although this kit uses DOT approved components, please note it is meant for off road use only. Proper installation is required, and all safety precautions should be heeded. 

Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.

Direct fit for:

☼ 1992-2005 Lexus GS300 / Toyota Aristo JZS147, JZS160, JZS161

☼ 1998-2000 Lexus GS400 / Toyota Aristo UZS160

☼ 2001-2005 Lexus GS430 / Toyota Aristo UZS161

☼ 2001-2005 Toyota Crown Majesta 1UZ

☼ 2001-2010 Lexus SC430 / Toyota Soarer UZZ40

☼ 1997-2017 Toyota Century V12 GZG50 

☼ 1989-2000 Lexus LS400 / Toyota Celsior UCF10, UCF11, UCF20, UCF21

☼ 1992-2000 Lexus SC300, SC400 / Toyota Soarer JZZ31, UZZ30

☼ 1993.5-2002 Toyota Supra JZA80 (turbo or N/A)

The XAT Racing Lexus BBK comes with everything you need to bolt on this new brake setup, short of your favorite brake fluid. That includes calipers, rotors, pads, pins, anti-rattle springs, mounting hardware, roll center adjusters, brackets, and stainless braided lines. Made in the USA!

Calipers are sourced from a 2007-2020 LS460, LS460L, LS600h, and even the new LS500 4 piston fronts, RWD non-sport package K17 style. We typically source a used set and rebuild them, though we can also get brand new OEM Lexus/Advics ones if you prefer. 

We typically prefer the Posi-Quiet Centric/Stoptech pads, as they have excellent street performance and are not unnecessarily loud/squeaky once properly bedded in. Other options are available as well, if you prefer.

For discs, we use preferred Centric/StopTech 2008-2014 IS-F 360mm (14.2 inch) rotors, not the cheap garbage ones. They come cross drilled from the factory (just like the IS-F rotors are), though we have other bolt on options as well if you're going for a different style or preference. We've not heard of any issues with rotor cracking like some other aftermarket applications have reported.

Please note that calipers are supplied bare natural dark grey. At this time, we do not have a reliable consistent source for powdercoating calipers properly, so we recommend reaching out to places local to you

Although this kit uses DOT approved components, please note it is meant for off road use only. Proper installation is required, and all safety precautions should be heeded. Most parts are readily available, but expect about a 1 week wait for us to have everything together

Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.