After the surprise success of our 2GS/SC430 brake adapters, we've started development on an IS300 version as well! These brackets let you bolt on 4 piston LS460 calipers to your IS300 / Altezza, making an inexpensive but VERY effective brake update option! Thanks to Toyota parts interchangeability, that means they also fit Chaser, Cresta, Crown, Mark 2, Progres, and Verossa chassis'!
In our continuing support of Lexus performance products and the UZ platform, we have finished this set of brackets to mount 4 piston LS460 / LS600h brake calipers to any USDM IS300 2000-2005!
These brackets are ideal for those DIYers that are looking for an inexpensive option for brake upgrades. You keep your factory brake lines in this bolt-on solution; all you need is a set of front 2007-2018 LS460, LS460L, LS500, or LS600h fixed 4 piston brake calipers, LS460 fitment pads, and a set of 2008-2014 IS-F 14" rotors!
Although the roll center adjusters aren't mandatory, they provide a bolt on solution. You do not have to run them, though if you do not, you may need to modify the mounting hardware. They will improve the suspension geometry on lowered cars at any rate, so we highly recommend them.
Please note that the LS460 does NOT use 5x114.3 rotors, so you will NOT be able to bolt on the LS460 rotor. We do not have fitment confirmation on the larger LS460 F-Sport 6 piston Brembo brakes, though they may also fit when used with larger rotors.
Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.
Please also note these will fit the S150 series hardtop Crown, not the Crown Majesta. The Majesta JZS155 will use our GS300 adapter brackets
☼ 2001-2005 Lexus IS300 / Toyota Altezza JCE10, GXE10, SXE10
☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100
☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)
☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)
☼ 2000-2003 Toyota Crown GS171 (1G-FE), JZS175 (2JZ-FSE), JZS171 (1JZ-FSE, 1JZ-GTE), LS151
☼ 1999-2007 Toyota Crown JZS175 (2JZ-GE, 2JZ-FSE)
☼ 2001-2007 Toyota Progres JCG10 (1JZ-FSE), JCG11 (2JZ-FSE)
☼ 2001-2004 Toyota Verossa GX110 (1G-FE), JZX110 (1JZ-FSE, 1JZGTE)
☼ 2000-2001 Toyota Origin JCG17
And possibly others!
You will receive 1 pair of brackets to mount both front calipers, as well as mounting hardware. Please note that we normally stock the brackets and rotors, however it may take 1 week to ship the calipers. Please note that free shipping is for the continental US 48 states only
Pictures show the RWD K17 type caliper being used. The AWD N18 caliper has the same bolt pattern, but the caliper sits taller on the rotor. As such, the N18 version will not work with the IS-F rotor. You'll need to stick to the K17 type. We do not support the N18 caliper, so you will need to verify before installation. We also sell the K17 calipers brand new for a very affordable rate!
Keep in mind these are designed for off road use only and professional installation is required. We have been driving on these kits for over 3 years, but use at your own risk.