Toyota Lexus 2UZ-FE 1998-2011 4.7 V8

WE HAVE PLUG AND PLAY APPLICATIONS AVAILABLE, SUCH AS 1UZ! Please contact us with your build and we can offer adapter harnesses

Please note free shipping is in the USA lower 48 states only. Please contact us with a shipping quote to your location if you are outside the USA or are in Hawaii/Alaska.

The Link G4X StormX ECU is the latest version of Link's trusty, mid-sized standalone ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors. The StormX has all the upgrades of the AtomX and MonsoonX but offers more advanced tuning features like a built in Trigger Oscilloscope, Stepper Motor Idle Control, Rotary Oil Metering Pump Control, Onboard Knock Control, Open and Closed Loop Boost Control plus most Motorsport features including Full Gear Shift Control, Antilag and Launch Control. The StormX has expanded data logging and is more responsive with a higher bandwidth than its G4+ Storm predecessor. G4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 kSamples/sec. It also features 8 x faster communications speed, allowing you to download logs 8 x faster and pushes all the logging quickly up to a new and improved PCLink.

OVERVIEW

Inputs

8 x Digital inputs

3 x Temperature inputs

8 x Analog inputs

2 x Trigger Inputs

2 x Knock Inputs

Outputs

8 x Injection drives

8 x Ignition drivers

8 x Auxiliary outputs^

+5V Sensor power supply

+8V Sensor power supply

(unused fuel and ignition drives can be used as additional Aux outputs)

Communications

1 x CAN bus

1 x USB tuning connection

Physical

Dimensions: 185mm (L) x 130mm (W) x 40mm (H) (without looms)

Mass: 660 grams

Advanced features not found on the Atom or Monsoon:

Built in trigger oscilloscope.

Onboard Knock Control – support for two knock sensors wired directly to the ECU.  No external amplifier required.

Boost control can be open or closed loop with up to three switchable tables.

Idle valve solenoid or stepper motor control.

Rotary oil metering pump control.

Most Motorsport features including full gear shift control, antilag and launch control

Up to 4 fully variable closed loop VVT cams. (up from 2)

WE HAVE PLUG AND PLAY APPLICATIONS AVAILABLE, SUCH AS 1UZ! Please contact us with your build and we can offer adapter harnesses

Please note free shipping is in the USA lower 48 states only. Please contact us with a shipping quote to your location if you are outside the USA or are in Hawaii/Alaska.

The Xtreme is what we recommend for most UZ V8 customers who don't need all of the features of the Thunder or G5 Voodoo Pro. It offers peak and hold injection, e-throttle control, anti-lag, cruise control, traction control, etc.

Link also provides 24/7 support for their products. Their boxes are created and manufactured entirely inhouse in New Zealand

OVERVIEW

Inputs

8/10* x Digital inputs

4 x Temperature inputs

11 x Analog inputs

2 x Trigger inputs

2 x Knock inputs

*2 inputs required when using 2nd CAN Bus

Outputs

8 x Peak and Hold injection drives

8 x Ignition drivers

10 x Auxiliary outputs^

+5V Sensor power supply

+8V Sensor power supply

^unused fuel and ignition drives can be used as additional Aux outputs

Communications

2* x CAN bus

1x Serial (RS232) connection

1x USB tuning connection

Physical

Dimensions: 185mm (L) x 130mm (W) x 40mm (H) (without looms)

Mass: 680grams

Advanced features not found on the Storm:

8 Peak and Hold injection drives, user definable current, 10 amp peak, 3 amp hold max.

Fully programmable E-throttle control complete with capability of gear shift throttle blip and antilag.

Cruise control.

Two independent CAN modules.

30 general purpose tables (up from 20)

All Motorsport features including full gear shift control, cruise control, traction control, antilag and launch control.

Advanced closed loop lambda strategy and dual bank lambda control

In most cases, we recommend 1.3mm head gaskets on 1UZ/3UZ (1.0mm on 2UZ), and if you are running custom compression aftermarket forged pistons. If you are keeping the stock pistons and looking to lower the compression ratio for more boost, we recommend a thicker head gasket such as 2mm. This is for BOTH head gaskets. We use factory OEM head gaskets when possible.

The 1UZ version of the head gaskets is specifically for the non-VVTi engine and does not surround the oil port going to the VVTi solenoids

Please keep in mind some sizes are exclusively made to order nowadays and will have a 1-2+ month wait time. The OEM head gaskets are more readily available.

Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each engine, Cometic offers a number of options to suit your specific build and needs.

The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound, and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.

The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.

The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

C4136 and C4137 offer a standard bore size of 92.5mm. C4211 and C4212 offer a standard bore size of 98mm

Please call or email us for an ETA and cost on other bore sizes, and note that they are special order and will take about 2 weeks to ship.

Link continues to gain traction in the UZ Toyota/Lexus V8 market, and rightfully so! They have an excellent selection of options available, and are an XAT favorite when it comes to engine management. Why pay extra for the AEM name when Link is just as (or even more) capable?? From now, on, you can expect all XAT projects to be powered by Link ECUs.

Each harness is custom made to order, so please be patient as you can expect a 1-2 week wait time for manufacturing typically. Please feel free to reach out to us beforehand and let us know what kind of application this is for. Swapping a 1UZ into an S13 or S14 240SX? Putting a 2UZ in a Tacoma/pickup? Factory Crown Majesta or GS430 getting "the beans?" Let us know so we can be sure to have the right harness made for your project.

This is not for a full engine harness, does not include ECU or sensors. This listing is for a plug-n-play adapter to fit your factory harness, whether it remains untouched or is rewired for a swap. Depending on your plans, you may need other parts as well for everything to work properly. If you're boosting it, you'll no doubt want MAP and IAT sensors to go along with it. Although superior up and down, the VVTi engines also have additional considerations over the non-VVTi, and reaching out to us via phone or email (sales@xatracing.com) is the best way for us to get you situated with what you need.

Please reach out to us with any and all questions, as your application may need more consideration or wiring than standard

For anyone that has purchased our plate elsewhere and not received hardware, broken, or misplaced it, we keep all of it in stock here ready to ship out!

The kit includes zinc-chromate and black oxide finish hardware, because it looks cool and resists corrosion well. Includes all hardware needed to bolt the transmission adapter plate to the transmission case (replacing the front bearing retainer), the hardware to bolt the transmission bellhousing to the adapter plate (including double redundancy nuts for the back), and 2 small allen screws to hold down the hydraulic throw out bearing.

Should you ever do something as silly as a twin disc clutch on your W or R kit, we've also revised our design to be able to use a quill tube, in which case the 2 small set screws would be used to keep this mounted in place.

What better option than factory? Instead of paying $400+ for an alternator in a Toyota box, we offer this same OEM alternator for a much more reasonable price. This specific listing is for the 90s style 3 pin oval connector. Please verify that you have this same oval style, and not the round 4 pin of some of the 2003+ UZ engines.

There may be a wait time for an OEM alternator. In the case that they are on backorder, we can likely get an equivalent brand instead. Feel free to contact us for availability first!

Please note depending on your application (including Century) you may need to cut off the extra mounting tab. This tab was added on later engines and serves no purpose on many applications.

For Century GZG50 V12 fitment, you WILL need to reuse your old pulley.

NOW IN STOCK, READY TO SHIP!

The initial test batch has been finalized, mounted, and confirmed for fitment! The display pieces are natural silver, but the finished product will be anodized black or anodized clear (silver). 

Assorted UZ engines use different pulleys depending on generation and chassis, but any pulleys that arent a direct replacement for your setup are easily fixed.

Full set of pulleys weigh just 2 lbs and 6 oz! Depending on your application, that's a savings of 1 lb 6 oz over stock!

Included pulleys, one of each:

• Power steering: this should fit all UZ engines, however some UZ V8s do not have serviceable power steering pump pulleys. They are pressed on instead of retained with a nut on the front. If you intend on using the XAT pulley, you will have to swap out your power steering pump for one with the retaining nut on the front. Please note that the diameter of your original pulley may be different from the XAT pulley supplied, which is factory 3UZ size, and may be preferable for your application to have it overdriven or underdriven slightly at any rate.
• Tensioner idler: fits UZ VVTi engines. Slightly different from 1UZ non-VVTi engines, so you may need a 3UZ serpentine tensioner pulley bracket. The VVTi serpentine tensioner fits the non-VVTi engine without issue, however the non-VVTi timing cover that goes over it will need slight trimming if you go this route
• Alternator: This will fit all 1UZ non VVTi, 1UZ VVTi, 2UZ, and 3UZ engines
• Hydrofan bracket idler: Likely different from other UZ engines such as 1UZ VVTi
• Upper idler: fits all 98+ UZs, including 1UZ VVTi, 2UZ, and 3UZ engines

Some pulleys might fit your engine just fine but end up being a slightly different size/diameter. This may also change which sized belt you will need, so please keep that in mind when installing.

For example, the Celsior non-VVTi engines (both UCF10 and UCF20) DO use a smaller diameter power steering pulley than the USDM American LS400. This would spin the pully faster and "overdrive" it. For drift, race and motorsport applications, we recommend the larger diameter pulley to underdrive it slightly.

The Celsior non-VVTi power steering pulley is the same as the American spec SC400 one.

Dump your WHOLE LOAD all over our full face! disc clutch. Why pay more for another clutch when this one exists? XAT is proud to announce our budget clutch kit for W55, W56, W57, W58, R150, R151, R154, and R155 fitment (as well as AR5 and KA/SR kits) when swapping to a manual transmission for your Toyota/Lexus UZ V8 using our adapter! We keep the Toyota trans fitment in stock, so if you need it quickly, we can ship it quickly. Other transmissions will need a custom disc and might take a few days to ship.

Does not fit the driftmotion aluminum flywheel

Torque Capacity:  299 lb-ft

Horsepower Rating:  325 HP

These V8s arent getting any newer, but they have a ton of life left in them! Keep your UZ on the road and making power with factory OEM replacement parts. We typically keep plenty of these kits in stock!

Kit includes all OEM:

• Timing belt
• Timing belt tensioner
• Timing belt tensioner bracket/pulley (optionally, our billet tensioner bracket as well)
• Timing belt idler pulley
• Water pump
• Gasket/O-rings

Our "standard" UZ Toyota V8 build has no problem holding 800 HP, but we also have options to do well over 1000+ HP!!

Standard short block build does not include heads (optional extras) but includes:

• Full inspection of all critical measurements 
• Eagle rods with standard ARP 8740 bolts
• CP/JE forged pistons and rings (optional upgrades include ceramic coated piston face, moly coated dry skirt coating, bigger/stronger wrist pins, etc.)
• ACL rod, main, and thrust bearings
• ARP main studs
• Hot tank/vapor blasted block
• Brand new OEM or UPGRADED OEM oil pump
• Fully assembled, fully machined, and fully balanced! 

We also offer upgrades over the above parts!

We've been doing UZs for well over a decade, so we know these engines inside and out. We also know the importance of being able to customize your build and have the flexibility to run exactly what your budget allows.

Before pistons are ordered, we inspect the block's condition and advise what sized pistons will be needed. This does not change the price, however you ideally will want as much cylinder wall thickness as possible, as that will hold power better, and it will give you room in the future to rebuild again if need be.

We also always use our in house torque plate to properly stress the block as with a head installed

Unlike other builders that order the pistons and drop them in, we make sure each bore correctly matches up with each specific piston! This is done to maximize fitment and sealing, which leads to more power and less blow-by.

Please note this does not include the core charge. We can easily source an engine for you, or you can send yours to us for building. We've built countless engines over the years and shipped them worldwide, including multiple builds making more than 1000 horsepower. 

This listing is for a build short block, which does not include, long block assembly, setting the cam timing, installing the heads, setting the valve lash, head studs, valvetrain, etc. We can do a full build including those things as well, just let us know what your goals are and budget is!

Contact us with your address for a shipping quote! Listing does not include shipping price to or from us. We can assist with the logistics and having that taken care of.

Ask us about additional "white glove" service options to really make your built engine stand out!

Our "standard" UZ Toyota V8 build has no problem holding 800 HP, but we also have options to do well over 1000+ HP!!

Standard short block build includes:

• Full inspection of all critical measurements 
• Eagle rods with standard ARP 8740 bolts
• CP/JE/Manley forged pistons and rings (optional upgrades include ceramic coated piston face, moly coated dry skirt coating, bigger/stronger wrist pins, etc.)
• ACL rod, main, and thrust bearings
• ARP main studs
• Fully assembled, fully machined, and fully balanced! 
• Hot tank/vapor blasted block
• Brand new OEM or UPGRADED OEM oil pump

We've been doing UZs for well over a decade, so we know these engines inside and out. We also know the importance of being able to customize your build and have the flexibility to run exactly what your budget allows.

Before pistons are ordered, we inspect the block's condition and advise what sized pistons will be needed. This does not change the price, however you ideally will want as much cylinder wall thickness as possible, as that will hold power better, and it will give you room in the future to rebuild again if need be.

We also always use our in house torque plate to properly stress the block as with a head installed

Unlike other builders that order the pistons and drop them in, we make sure each bore correctly matches up with each specific piston! This is done to maximize fitment and sealing, which leads to more power and less blow-by.

Please note this does not include the core charge. We can easily source an engine for you, or you can send yours to us for building. We've built countless engines over the years and shipped them worldwide, including multiple builds making more than 1000 horsepower. 

This listing is for a built short block, which does not include long block assembly, setting the cam timing, installing the heads, setting the valve lash, head studs, valvetrain, etc. We can do a full build including those things as well, just let us know what your goals are and budget is!

Contact us with your address for a shipping quote! Listing does not include shipping price to or from us. We can assist with the logistics and having that taken care of.

Ask us about additional "white glove" service options to really make your built engine stand out!

Don't get stuck using those old, used, obsolete hand-me-down Supra injectors, start fresh with a healthy size and don't look back! These drop in to your stock fuel rails!

All Victory injectors start out as Bosch cores. They are then sized and matched within 1-2% providing exceptional idle quality. All injectors come with a limited 2 year warranty (minus 2200cc injectors.) You will also receive 1 free cleaning within the first 2 years! All injectors are a top feed high impedance injector and a direct drop in on the 1uz/2uz/3uz. VVTi engines supported as well. Make sure you select your size from the drop down menu! Includes a full set of 8 for your UZ engine

Please contact us for wiring options. While we try to sell these as drop in, plug in injectors, the plug-n-play adapters may be on backorder. You may have to wire in the 2 wire connectors to your harness yourself, in which case they will be included. 

550cc, 650cc, 850cc, and 1000cc use USCAR connectors. 1200cc, 1300cc, and 1650cc use EV1

It's a banjo fitting! We use these in our clutch line kits as a low profile way to connect lines. Fits most Japanese (including Toyota) master and slave cylinders. We typically keep plenty in stock. Converts your system to AN. If you're not sure which one you need, please feel free to reach out to us beforehand and we will be happy to assist

Includes everything pictured:

Banjo bolt

Banjo fitting

2 crush seals

This fitting replaces the quick disconnect style fitting on your T56 style throw out bearing and converts it to -AN instead. We include them with adapter kits and clutch feed line assemblies, but if you need a replacement one, we typically stock them as well.

You will need to drive out the retaining pin to take out the GM style quick disconnect fitting, replace it with this adapter fitting, and reuse that pin to keep it in place

This listing includes all of the parts to assemble a stainless braided clutch hose kit for our transmission adapter kits not using a Nissan 6 speed (CD009/JK4/1EA,etc.), all for a price that's nice. Choose your desired length. 36" fits most LHD cars including Mk3 Supra, MkIV Supra, IS300, S13, S14, etc. This kit fits the T56 style throw out bearing specifically 

Please keep in mind you will need to drive out the retaining pin holding the "GM quick disconnect" style fitting on the feed side of the TOB, keep the pin, and reuse it for the replacement fitting.

Throw out bearing not included with base kit

Includes:

• 36" (or optionally 48") stainless steel braided clutch hose
• Replacement adapter fitting to convert to AN line
• Banjo bolt, fitting, and crush seals to connect to clutch master cylinder (M10x1.0, most Japanese applications)

This listing includes all of the parts to assemble a stainless braided clutch bleeder/drain hose kit for our transmission adapter kits not using a Nissan 6 speed (CD009/JK4/1EA,etc.). Choose your desired length. 10" will just get you by, but longer hoses will let you bleed the system without laying on your back under a car in an uncomfortable and potentially dangerous spot. This kit fits the T56 style throw out bearing specifically 

Please keep in mind you will need to drive out the retaining pin holding the "GM quick disconnect" style fitting on the feed side of the TOB, keep the pin, and reuse it for the replacement fitting.

Throw out bearing not included with base kit

Includes:

• 36" (or optionally up to 48") stainless steel braided clutch hose
• Replacement adapter fitting to convert to AN line
• Banjo bolt, fitting, and crush seals to connect to clutch master cylinder (M10x1.0, most Japanese applications)

Custom made in house full size flywheel! This flywheel is meant to be an option with a full size ring gear, with extra mass and MOI to make for a more reasonable street driving setup when used with an XAT QuarterMaster 8.5" twin disc clutch

This ONLY is made for the QM 8.5" twin clutch (not 7.25") and is NOT meant for single disc clutches. Made to fit 1UZ, 2UZ, and 3UZ engines with our manual swap conversion parts.

Also includes ARP flywheel bolts and infinitely rebuildable friction surface with hardware. CLUTCH KIT NOT INCLUDED. The assembled RaceLyte clutch and flywheel weighs 22 lbs 14 oz.

Full weight version weighs 25 lbs on the dot! Does not include clutch with listing. Made in the USA!

When we took a look at the previous generation of adapter plates, all we could see was room for improvement and higher quality. We wanted a plate that would mount PERFECTLY with zero slop. It needed to look good and perform even better. DON'T get stuck with an overvalued, sloppy plate that ends up costing you input shafts and has poor fitment. You can go with a less expensive alternative and end up with broken parts, or you can do it right the first time with us! No complaints with over 5 years of service.

This billet aluminum adapter plate reuses your factory 4 speed auto 1GZ bellhousing (1997-2004). It will require you to cut off the CD009 bellhousing, which gives MUCH more room to work with in most chassis. Alignment of the input shaft becomes dependent on this plate and not the quality of the bell housing cut, so worry not! This isn't like other kits out there. NO additional hardware/starter modification is required!

2005-2017 bellhousings will not fit with this adapter. Although the GR-to-CD009 adapter plate we offer would bolt up, the thickness spacing is still wrong

Regardless of which clutch you use, you will need to use the Quarter Master throw out bearing. 

With single disc clutch setups, this kit is designed to use our custom flywheel that uses off the shelf "Z32 turbo" (89-96 Nissan 300ZX twin turbo) clutches, which are inexpensive, readily available, and hold power well. 

Please see the listing below for the flywheel needed. Please note that with a single disc clutch, this requires a proprietary flywheel. OUR "OEM STYLE" AND "LIGHTWEIGHT" XAT FLYWHEELS WILL NOT WORK WITH THIS TRANSMISSION. You will need the specific CD009 flywheel made for this application.

The twin disc setups include their own flywheel, but will also need a ring gear for the starter (the OEM auto flex plate). 

Included with base purchase on this listing:

• Adapter plate with hardware to install
• Quill tube for mounting the hydraulic throw out bearing
• Pilot bushing adapter, with bushing installed

XAT Racing took a hard look at the concept, and decided to go all in with the "Toyota Big-Block" design. These V12s have started becoming more popular over the past few years! This will fit all versions of this transmission: CD001, CD003, CD005, CD008, CD009, JK41A, JK41B, JK40C, 1EA0A, and 1EA0B from the 2003-2008 Nissan 350Z/Fairlady Z, 2009-2020 370Z, Skyline V35 and V36 non-GTR sedan and coupe, and Infiniti G35 and G37 

Our products are CAD designed with OEM blocks and transmissions on professional equipment by industry professionals. No bad measurements, no flame cuts, no warped discs, no nonsense. You should be using a 3/4" master cylinder in tandem with the TOB we use.

This is the missing link for doing the 1GZFE swap, or simply adding a manual transmission to your already badass Toyota Century. Our CNC process for manufacturing the plate results in an extremely precise adapter plate, laser tight tolerances, and a focus on quality that has yielded a product that will produce less wear on the transmission and clutch. The adapter kits come with the needed pilot adapter and bushing as well. This is the tried and true kit from XAT Racing, except no imitations when it comes to Toyota V12 1GZs. Sorry, V12 not included.

You can also use the less expensive RAM throw out bearing with this kit, however we do not support it. You will need to drill and tap the plate at your own risk to mount one.

Click here for install instructions

Looking for a clutch for this adapter plate? 

XAT Racing Toyota Lexus 1GZ V12 Lightweight Billet Aluminum 13.5 lb Flywheel for CD009 Nissan Infiniti 6 speed 350Z 370Z G35 G37 Manual Transmission Swaps. Made in the USA!

ITBs on any 98+ UZ engine! Fitment for any 1UZ VVTi, any 2UZ, and any 3UZ. As seen on Fredric Aasbø's 3UZ AE86!

This kit is now finished!

This price includes used throttles, new fuel rails, adapters, actuation rods, and TPS. You will need to make a custom cable connected to your gas pedal. First kits have already shipped! Uses S65 BMW 4.0 V8 throttles

Please note your water bridges will need slight clearancing for this kit to fit, and there's no way around that.

Looking to delete that power steering pump and go electric? We've got you covered! These are custom made, in house designed, machined in the USA (as all of our products are), and ready to go.

Included is the billet piece and the pulley. This will bolt up to your factory power steering mount bracket. The size of the pulley is the same as the top idler pulley. Depending on what else you may be doing, you may need to use a different belt size. Best way to check size needed is to use a piece of string to route around and measure the length needed.

Please select if you have a VVTi engine or non-VVTi from the dropdown. If you're not sure which version you need, feel free to take pictures and measurements and reach out to us!

You will need to shorten 2 of the bolts for installation as well. 

For 2UZ fitment, you WILL need to source a 1UZ VVTi or 3UZ mount bracket for this

Although the picture shows 8 bolts, you will receive a full set of pressure plate bolts for your application. Make sure you have your correct application picked out! Some flywheels use 6, some use 9. Feel free to reach out to us if you have any questions

This will fit all UZ engines, VVTi or non. We keep the factory oil pump in stock, so we can typically ship out a modded pump next business day!

Higher horsepower means more oil demand. When you're running twice or three times the stock power output, you absolutely have to be sure your engine is getting lubricated everywhere it needs to! Especially if you have an aftermarket oil cooler to keep oil temps down!

What does XAT do to bring you options for a better oil pump? We take a brand new OEM 98+ Toyota pump, remove all hard edges, radius all corners, enlarge the front main seal drain, and shim the pressure relief valve to give more max PSI. Make sure you get a quality oil pump for your engine, from the professionals at XAT!

In the pictures, you can clearly see some the upgrades we have made. Check out pictures where you can see the oil pressure relief piston polished for smoother operation, and more consistent oil pressures.

There's plenty we do to greatly improve the oil flow without trying to "reinvent" the stock setup! The factory oil pump works well for factory applications, but there's clearly plenty of room for improvement, as we show here.

Take a look at the nasty hard edges that oil goes through, thanks to mass production. Get the added insurance of a much better oil pump from the professionals at XAT Racing!!

Please note there are 2 different diameter pulleys the UZ engines used. Depending on your setup, you should have either a 90mm or 102mm pulley. We do include a serviceable bearing as well with these pulleys, which will last the life of your engine!

You will need to verify which setup you have before purchasing!

One of the few carryover parts from the JZ engines! This means this alternator pulley will fit all 1JZ, 2JZ, 1UZ, 2UZ, and 3UZ engine alternators. This pulley has the same diameter as stock as well, but looks much better! Billet CNC machined pulley with our brand laser etched into the sides. 

Top idler pulley for your UZ's serpentine belt drive! These billet pulleys include a serviceable bearing, so the pulley should last the life of the engine.

As it turns out, not all UZ power steering pulleys are the same! Some of them are not serviceable. Additionally, the 98+ (VVTi and all 2UZ engines) use a different style pulley from the earlier cars.

Please note some UZ V8s come with a fixed, press on pulley to their power steering pump. If you have one of these, you will need to swap your power steering pump for one that has a hex nut retained serviceable pulley. We strongly recommend checking what you have before ordering, and feel free to reach out to us with any questions. They are otherwise interchangeable and not too difficult to source!

Already have a supercharged UZ with an engine pulley kit? Finish up the look and replace that idler pulley with one of ours! XAT is always looking to offer as many Toyota V8 parts as we can, and we will continue to bring more parts to market as long as we are alive! These billet pulleys include a serviceable bearing (not pictured), so the pulley should last the life of the engine.

The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications & a huge 512 megabytes of data logging!

With 8 injector drives and 6 ignition drives, the FuryX can control up to 3 rotors or 6 cylinders with sequential injection and direct spark, making it an excellent choice for professional level motorsport or more demanding road car applications.

The added benefit of a Onboard Digital Wideband Lambda Controller means higher accuracy of the unit, plus a simple setup.

The FuryX comes supplied with stickers, a quickstart guide, a mounting bracket and a USB tuning cable.

Link also provides 24/7 support for their products. Their boxes are created and manufactured entirely inhouse in New Zealand

OEM 2UZ crankshaft sensor! Fits all 98+ 2UZFE engines, VVTi AND non-VVTi

Please check with us for availability of this alternator. We normally stock the 130 amp version, however the 150 amp has been difficult to source consistently.

Drop in, plug-n-play, rebuilt OEM Toyota 150 amp alternator to fit your UZ! Fits all UZ engines, and bolts right in without any modifications. Don't settle for a poor quality rebuild from whoever has it cheapest. Opt for the best, for years of trouble free operation! Please note that some UZs have the connector in a different location, so you will need to verify your application has the connector that comes straight back out of the back of the alternator, and not plug in on top with a 90* angle.

We also have installed these on our GZG50 V12 Centurys!

These use a 4 pin connector, but we include the plug-n-play adapter with every order, so no extra work required! 100% ready to go

This alternator also has an extra mounting rib that newer UZ engines added, however this is not required for mounting, does not get in the way, and does not need to be machined off in most cases. Some fitments will require this

Please note this adapter harness only works on UZ engines with the oval style connector. If you have the round connector, you will have to rewire your harness for this to work, which is fairly straightforward since it's only 3 wires. 

You will also need to verify that your plug is in the same position as the picture on your application. Some applications do not have room behind the alternator itself to plug in, and instead have the plug radially mounted instead of axial mounted. We do not currently have a replacement option for that. There may also be a slight wait time for the OEM version. We may need to substitute a different brand instead. Please reach out to us for availability.

WE HAVE PLUG AND PLAY APPLICATIONS AVAILABLE, SUCH AS 1UZ! Please contact us with your build and we can offer adapter harnesses

This works on UZ engines, and there is a built in 1UZ non-VVTi start up base map. Great budget oriented option if you only need the bare minimum standalone option. Capable of running only in wasted spark and batch fire injection on a V8. Full sequential operation would require a Storm at minimum.

Please note free shipping is in the USA lower 48 states only. Please contact us with a shipping quote to your location if you are outside the USA or are in Hawaii/Alaska.

**Please allow 4-6+ weeks from the date of order until the item is ready to ship .**

This is ELATE’s first low mount manifold to suit the 1UZ, 2UZ and 3UZ VVTIORNON-VVTI 1989-1997 1UZ V8 engine with an integrated W2A intercooler core. Not all engines are interchangeable, make sure you select your engine from the dropdown menu!

The manifold features a unique 2 piece design which has helped us get the units as low and as tight as possible, the upper and lower halves are held together by 4 x zinc plated countersunk fasteners and sealed using 3mm EPDM cord to make sure boost pressure stays where it needs to. The units are CNC machined from billet 6061 aluminum, media blasted and anodized black.

The core features CNC machined end tanks that seal to the inside of the manifold using nitrile o-rings and secured to the body using 2 x M8 fasteners.

All manifolds ship with your choice of 10mm aluminum top plate however if something custom is needed just drop us an email to see if we are able to assist.

This manifold has been designed to suit the factory 1UZ injectors or any aftermarket replacements that suit the non VVTI 1UZ’s.

**Note** The hard line that connects the fuel rails at the front and rear of the manifold will need to be swapped out for a flexi AN line due to making contact with the manifold when installed. SVT M112 superchargers also need the factory intercooler mount on the underside removed to allow it to mount to this top plate.

This kit includes the following items:

• Billet 2-piece manifold.
• Aluminum top plate to suit the charger of your choice.
• 150mm x 270mm x 30mm intercooler core with CNC machined end tanks.
• 2 x 1/2″ BSP to barb fittings.
• 17 x Zinc plated M8 x 20 countersunk fasteners (for the top plate and manifold body assembly).
• 10 x Zinc plated M8 x 50 cap screws (for attaching the manifold to the heads)
• 3mm EPDM cord (installed)
• Installation instructions
• Email assistance if required.

** Please allow 4-6+ weeks from the date of order until the item is ready to ship .**

This is ELATE’s all new low mount manifold to suit the 1UZ, 2UZ and 3UZ VVTIORNON-VVTI 1989-1997 1UZ V8 engine. Not all engines are interchangeable, make sure you select your engine from the dropdown menu!

The manifold features a unique 2 piece design as with the VVTI version which has helped us get the units as low and as tight as possible, the upper and lower halves are held together by 3 x zinc plated countersunk fasteners and sealed using 3mm EPDM cord to make sure boost pressure stays where it needs to. The units are CNC machined from billet 6061 aluminum, media blasted and anodized black.

All manifolds ship with your choice of 10mm aluminum top plate however if something custom is needed just drop us an email to see if we are able to assist.

This manifold has been designed to suit the factory 1UZ injectors or any aftermarket replacements that suit the non VVTI 1UZ’s.

**Note** The hard line that connects the fuel rails at the front and rear of the manifold will need to be swapped out for a flexi AN line due to making contact with the manifold when installed. SVT M112 superchargers also need the factory intercooler mount on the underside removed to allow it to mount to our top plates.

This kit includes the following items:

• Billet 2-piece manifold.
• Aluminum top plate to suit the charger of your choice.
• 17 x Zinc plated M8 x 20 countersunk fasteners (for the top plate and manifold body assembly).
• 10 x Zinc plated M8 x 50 cap screws (for attaching the manifold to the heads)
• 3mm EPDM cord (installed)
• Install instructions
• Email assistance if required.

Please allow up to 5 days for your order to be assembled and ready to ship.

**Made-to-order products have a lead time of approx 3 weeks from date of order until they are ready to ship**

Fabricate your own exhaust for your ride! This kit is for popular vehicles with UZ engines, and there are plenty of ways to option it out for your preferred setup. All parts and piping are quality T304 stainless steel. U-J bends are mandrel bent, not crush bent, as to keep even and consistent flow.

Base kit includes:

• (4) 2.5" U-J bends 
• (2) 5 foot sticks of straight tubing 
• (2) stainless Vibrant mufflers
• (2) flex joint couplers

PLEASE NOTE THIS IS FOR OFF-ROAD, RACE ONLY APPLICATIONS ONLY. Modifying and tampering with factory emissions equipment is illegal in many jurisdictions, so please consult your local laws BEFORE ordering. 

This kit is NOT available to ship to California.

This is also NOT a 100% complete kit. You will need a competent welder to finish up the rest on your specific chassis. Different and additional parts are also available by request! Please contact us for a shipping quote if you're not located in the US 48 states.

This service includes modifying both heads, not just one side. You get a full port job, 5 angle valve job, cylinder head inspection, and the heads get hot tanked for a proper cleaning. We offer this service for all UZ engines, VVTi or non. Regardless of what chassis your engine is out of, we service them all! LS400, LS430, GS400, GS430, SC400, SC430, Land Cruiser, Tundra, Sequoia, GX470, LX470, etc.

Please keep in mind that your heads will likely require extra work: heads will typically need to be decked, valve lash needs to be set (we can do this, will need your cams), and you may need other parts replaced such as valve guides. We will keep in touch with you during this process and let you know what your setup needs.

For the 1UZ non-VVTi engines from 89-97:
We offer a spring and titanium retainer kit using Brian Crower parts. We also can get custom valves that are +1mm oversized and use a shimless bucket to adjust the valves after installation.

For the 1UZ VVTi, all 2UZ, and all 3UZ engines from 1998-2013:
We offer a spring and titanium retainer kit using SuperTech parts.

XAT Racing/ MANLEY Stainless Steel swirl polished valves are offered in stock or 1mm oversize sizes for our build process, as well as brand new Ferrea valve lock keepers

You cannot define every possibility in a single description or for all applications, but 'generally' speaking, what we provide with our Street Cylinder Head Refresh package is great for up to 8,000RPM, more RPM would be possible with proper optional valve train.

In reality, no matter what purpose/intended use of your build, you will benefit! The truth is unless you are building a 1300HP+ drag car, you can pretty much eliminate any serious deep cylinder head porting. You simply do not gain enough volumetric efficiency by hogging out a ton of metal in the heads, unless you are running a silly-high lift custom cam.

If you live outside of the USA, NO PROBLEM! Please contact us for a shipping quote and we will be happy to help you out! PRICE DOES NOT INCLUDE SHIPPING TO OR FROM US

ACL Lexus V8 1UZFE/2UZFE/3UZFE Standard Size High Performance Rod Bearing Set

Need just the rod bearings? We typically stock these, the main bearings, and thrust washers!

One thing Toyota seems to have struggled with for a few decades was valve stem seals. We use these Viton stem seals on all 98+ UZ engines we build! That includes 1UZ VVTi, 2UZ (VVTi and non), and 3UZ engines.

If your engine smokes briefly at startup and at no other time, it's likely time to replace these.

Please make sure you select the correct engine, as the 98+ seals are different from the 89-97 ones

Once again XAT Racing is filling the gaps in the TOYOTA V8 market with another custom product made exclusively for all 98+ TOYOTA UZ series V8 engines! When building a high horsepower engine, a good focus is on the durability factor of the parts used to complete the engine. The engine's intake and exhaust valves are one of these areas needing to be more robust and/or improved upon when building sustainable power. XAT has one again teamed up with industry giant MANLEY to bring our new 1UZ vvti, 2UZ, 2UZ vvti, and 3UZ Stainless Steel valve kit to market! These valves are available in stock size, .5mm oversized, as well as 1mm oversized. Full stainless steel construction with a swirl polished finish for the best available fitment and performance factor for you, the valued XAT Racing customer. 

These valves come in a complete kit of 16 intake and 16 exhaust valves for one engine. Might take 2-3 weeks to make and ship out.

High performance progressively wound PACALOY™ beehive valve spring and high-grade titanium retainer kit. This kit was engineered to match Kelford camshafts for ultimate quality performance and reliability. 

80lb seat pressure @ 34.30mm 

Installed height / 190lb @ 12mm lift 

Coil bind is at 21.0mm

Anyone looking to turn their UZ V8 into something EXTREME should strongly consider a turbo setup! The biggest issue with "1UZ turbo kits" (or any UZ turbo kit) is chassis fitment. With every car and truck having different clearances, there's not a "one size fits all" turbo kit. Intake and exhaust piping will be unique to each setup.

Fortunately we have a solution to help get you started! You'll need to finish the rest of the plumbing on your chassis with the engine and turbo(s) mounted. Base headers are left open so you can either weld turns/transitions or your own flange. Optionally, we can weld 44mm v-band flanges to the end, so all you need to do is figure out the rest of the piping.

With this setup, you can mount the headers on either side. They are fully reversible! The most common solution is to run a single or twin turbos up front with the manifolds pointing forward. Remote mount turbos are also an option.

• All stainless construction
• Schedule 40, 304 stainless piping
• 1/2" thick header flanges
• Hand made in the USA, in house

Please note these are made to order so there might be a slight wait time. Although we can take custom requests, we cannot promise fitment. Made in the USA!

• 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total)

G5 Voodoo Pro can run up to:

• V12 or six rotors with sequential injection and direct spark, or
• V8 with staged injection and direct spark.

Staged injection (where you run two individual injectors per cylinder) is great for applications that require lots of fuel, such as high horsepower Drag Cars, and is becoming more common in other motorsports and street use.

The G5 Voodoo Pro can run staged port injection and direct injection (DI). Having the 24 drives allows you to add supplementary port injectors to a DI engine to supply more fuel to reach your power goals or to prevent carbon deposit build up on your intake valves. Any left-over drives can be used as auxiliary outputs.

Direct Injection (DI) on up to 12 injection drives

The G5 Voodoo Pro is a cost-effective solution to opening up the world of both Port and Direct Injection. The G5 Voodoo Pro is capable of controlling Direct Injection on up to twelve injection drives, and requires an external OEM or aftermarket DI driver box. The G5 Voodoo Pro can run up to two DI fuel pumps using unused injection or ignition drives.

Built in Wi-fi

Built-in Wi-Fi means you don’t need to be physically connected to the ECU, or even in the vehicle or on the same side of the pit wall to pull logs and make changes. This means no more fighting through the roll cage and digging under the dash to find the ECU, before trying to plug in the cable while not breaking any pins.

Multiple G5 Voodoo Pro ECUs can be set-up on the same Wi-Fi network allowing you to switch seamlessly!

Built-in Global Positioning System (GPS)
Link’s high accuracy, high frequency GPS allows you to log position, ground speed and UTC time for data analysis at 50 times a second using Link’s Sensor fusion augmented GPS Technology.

This can be used for coaching, especially when connected to a driver analytics tool like MyRaceLab. It also allows you to be creative around setting up features or functions against position, real time or GPS speed.

And Link’s GPS can operate as a vehicle speed sensor for vehicles that don’t have one, giving you an accurate ground speed, such as some race cars or boats. It can be used to easily calibrate wheel speed and to compare wheel and ground speed to determine if tire slip is occurring.

With Dead Reckoning, Link's GPS will continue to calculate position when GPS lock is lost such as in a tunnel, garage or dense bush.

In the box:

• G5 Voodoo Pro ECU
• USB-C Connection Cable
• WiFi Antenna
• 4m GPS Antenna (Magnetic or Adhesive Mount)
• USB-C and SMA Dust Covers
• QuickStart Guide (A5)
• Installer I/O table (A3)
• Link stickers

XAT has been building Toyota/Lexus UZ V8s and developing new parts for almost 2 decades for customers worldwide. We pride ourselves with taking the time to correctly assemble and rebuild every engine, knowing them inside and out. We also are excited to build more and more of these for boost, as we feel a manual transmission and a turbo or supercharger are what these engines really respond best to.

Every engine gets hand built to order. Not everyone has the same goals or budget in mind, so we have built everything from mild to wild!

You will need to send us your engine, or we can supply a core. 

Our "base" engine build handles 800 HP reliably, but we do have a variety of options that you should also consider. If you're not sure if you want them, keep in mind that it's much easier to spend a few extra bucks while we have it and it's apart, than it is to go back in later and add these parts!

Base build includes fully assembled engine, ready to drop in:

• Eagle ESP rods, optionally BC ARP2000 rods
• JE or CP pistons for high compression N/A or low compression boost
• All new timing parts (belt, tensioner, pulley, water pump)
• ACL rod/main bearings, OEM thrust washer
• Block honing with torque plate
• Hot tanked engine
• XAT modified high performance oil pump
• Ported intake/exhaust ports
• Valve job
• ARP head studs
• ARP main studs
• Heads bolted to block, timing set
• Valve lash set with shims
• New valve stem seals
• New valve locks/keepers

Every engine shipping from us also gets crated in ISPM 15 certified wood crates for international shipment. Your investment needs to be protected, and this is included in the build price

Shipping is not included, you will need to reach out to us with your location and we can get shipping quotes to your address!

Ask us about additional "white glove" service options to really make your built engine stand out!

Select your specific UZ engine application from the dropdown menu!

For those that need more electricity than our 150 amp option can provide, we have teamed up with JS Alternators to offer these custom made to order options! Even better, theyre plug and play, no adapter wiring needed!

JS Alternators also requires their universal Big 3 wiring kit, or otherwise similar wiring upgrades in addition to the factory wiring in order to handle the higher output. The big 3 Wiring upgrade is an ADDITION to your factory wiring.
All factory connections need to remain connected. For protection, it is recommended to add an in line fuse to the positive wire. All grounds must be cleaned to bare metal and properly secured.

Big 3 wires are 1/0 gauge pure copper cables. 1 positive to connect from the positive stud on the alternator to the positive battery terminal. Other 2 ground wires go from the alternator mount bolt to frame/chassis, and negative on the battery to frame/chassis.

Most JS Alternators are custom built to order and typically take 5-15 business days to be built and shipped. All JS alternators have a lifetime warranty on labor, and 1 year warranty on parts.

Hairpin units are commonly called 6 phase. They produce more output at idle and are more efficient than a conventional alternator. JS Alternators hairpin units feature premium bearings to withstand high engine rpm and utilize dual plate rectifier with 12 heavy duty diodes for improved cooling. Hairpin Units are a more reliable alternator to withstand high heat, high demand for car audio, marine, and racing applications.

Don't bet your engine and cooling system on subpar cheapo parts, especially when the OEM ones are so inexpensive! We have fitment listed for all UZ engines, and even the 1GZ V12!

If you're in there doing maintenance anyways, why not replace with brand new factory parts and get another 20+ years out of them??

Typically takes less than a week to ship out! If youre uncertain, please observe the above pictures and match yours to the correct fitment.

Do you have a hydrofan you're eliminating? Or a non-serviceable, pressed on (instead of bolted on) center idler? We have an easy fix! Let us know which engine you have and we'll get you the right fitment idler bracket.

Although this is one of the most universal parts we sell, it's also one of the most interesting, and one of the few that we sell that has FAA approval for aircraft use! Most people just buy whatever oil filter they find and toss them after use. There's a better option however, especially if you plan on owning your vehicle for many years to come! 

Made in the USA with a billet aluminum housing and a stainless micronic medical grade mesh filter element that is easily serviced and cleaned, this is a great long term solution for your cherished ride. There's a number of advantages that come with using a high quality filter like this, instead of a generic spin on replacement.

• Easily tell the condition of the oil in your engine with every oil change. Instead of destroying an oil filter each time to inspect the contents, you simply wash out and reuse the same filter element.
• Filter element is reusable countless times, and easily cleaned with brake cleaner and/or soap and water
• Filter element includes a built in magnet to trap ferrous debris from circulating through the rest of your engine's oil system
• No more trying to loosen an overtightened oil filter! Every spin on filter includes a matching oil filter cap socket to easily loosen and remove, so no more fumbling and struggling with a filter that refuses to come out.
• As time goes by, oil filters become more and more expensive. Do you think your favorite oil filter will be the same price in a few years? It wont take long for this to pay for itself!
• Apocalypse proof! Even if supply chains get interrupted, you can keep on truckin' without having to worry about sourcing a replacement filter for your engine.
• Even if you miraculously somehow manage to damage the filter element, replacement ones are readily available and not expensive
• Better oil flow than regular paper filters, meaning less start-up wear
• Have more questions? Check out this extensive FAQ: https://kandpengineering.com/faqs/

Fits most engines we specialize in! Including 1JZ, 2JZ, 1UZ, 2UZ, 3UZ, 1GR, 2GR, 3GR, 4GR, and so many more

W-Series Transmission Adapter for 1UZFE Swap FITS ALL KNOWN W SERIES ALUMINUM HOUSING TRANSMISSIONS

1UZ 2UZ 3UZ R-154 R150 R151 R150F R151F 5 Speed Adapter and Throwout Bearing Kit (also fits 1997-2004 Toyota V12s!) 

Made in the USA! When we took a look at the previous generation of adapter plates, all we could see was room for improvement and higher quality. We wanted a plate that would mount PERFECTLY with zero slop. It needed to look good and perform even better. DON'T get stuck with an overvalued, sloppy plate that ends up costing you input shafts and has poor fitment. You can go with a less expensive alternative and end up with broken parts, or you can do it right the first time with us! No complaints with over 5 years of service.

This billet aluminum adapter plate reuses your factory 4 speed or 5 speed auto UZ bellhousing (1990-2004). It will require you to cut off the CD009 bellhousing, which gives MUCH more room to work with in most chassis. Alignment of the input shaft becomes dependent on this plate and not the quality of the bell housing cut, so worry not! This isn't like other kits out there. NO additional hardware/starter modification is required!

2005+ 6 speed auto bellhousings will not fit with this adapter. 

Regardless of which clutch you use, you will need to use the Quarter Master throw out bearing. 

With single disc clutch setups, this kit is designed to use our custom flywheel that uses off the shelf "Z32 turbo" (89-96 Nissan 300ZX twin turbo) clutches, which are inexpensive, readily available, and hold power well. 

Please see the listing below for the flywheel needed. Please note that with a single disc clutch, this requires a proprietary flywheel. OUR "OEM STYLE" AND "LIGHTWEIGHT" XAT FLYWHEELS WILL NOT WORK WITH THIS TRANSMISSION. You will need the specific CD009 flywheel made for this application.

The twin disc setups include their own flywheel, but will also need a ring gear for the starter (the OEM auto flex plate). 

Included with purchase on this listing:

• Adapter plate with hardware to install
• Quill tube for mounting the hydraulic throw out bearing
• Pilot bushing adapter, with bushing installed
• Throw out bearing (optionally)

XAT Racing took a hard look at the concept, and decided to go all in with the "Toyota Big-Block" design. These V12s have started becoming more popular over the past few years! This will fit all versions of this transmission: CD001, CD003, CD005, CD008, CD009, JK41A, JK41B, JK40C, 1EA0A, and 1EA0B from the 2003-2008 Nissan 350Z/Fairlady Z, 2009-2020 370Z, Skyline V35 and V36 non-GTR sedan and coupe, and Infiniti G35 and G37 

Our products are CAD designed with OEM blocks and transmissions on professional equipment by industry professionals. No bad measurements, no flame cuts, no warped discs, no nonsense. You should be using a 3/4" master cylinder in tandem with the TOB we use.

This is the missing link for doing a 1UZFE swap, or simply adding a manual transmission to your Toyota V8. Our CNC process for manufacturing the plate results in an extremely precise adapter plate, laser tight tolerances, and a focus on quality that has yielded a product that will produce less wear on the transmission and clutch. The adapter kits come with the needed pilot adapter and bushing as well. This is the tried and true kit from XAT Racing, except no imitations when it comes to Toyota V8s 

Click here for install instructions

You can also use the less expensive RAM throw out bearing with this kit, however we do not support it. You will need to drill and tap the plate at your own risk to mount one.

Looking for a clutch for this adapter plate? 

Our 1UZ / 2UZ / 3UZ series V8 chromoly flywheel is made form some of the hardest, most durable metal we can source for a flywheel. 

Our machine shop gets mad every time we do a production run--they go on and on about how hard the alloy is, takes longer to machine, wears out tooling... Well that's great news if you're planning on abusing your V8!!! This flywheel will take some serious abuse without a doubt, and we have proven it ourselves in our personal cars over a length of time. 

Weighing in at just 13 LBS, you will instantly notice your V8 rev up and rev down much faster! This equates to a more responsive throttle, getting to the important parts of your powerband, and more efficient engine braking. 

Our flywheel utilizes the proven torque holding clutches of the SW20 MR2 TURBO 3S-GTE. We offer clutch setups to suit everything from a stock engine all the way to to 680 FT/LBS with this flywheel! 

When installing our flywheel: installing the OEM automatic bolt guide on the crank before installing the flywheel is required. This item is curved--the curve needs to face the engine and fit flat on the crank-to-flywheel mating surface. Please see pictures for more information as well. After installing the bolt guide, torque the included ARP bolt kit to 70 FT/LBS using red thread locker/loctite on the bolts, and tightening in a star pattern, not one next to the other. We also recommend tightening down in 2 or 3 goes as well instead of going from finger tight straight to 70 ft lbs. 

This flywheel is meant for our W55/W58, R150/R151, R154, KA, and SR transmission adapters. This will NOT work with our CD009 / JK series Nissan 6 speed adapter!

This XAT flywheel is perfect for those who want a simple and straightforward flywheel for a manual conversion on their Toyota/Lexus V8. Affordable cast flywheel with OEM quality and OEM ring gear. 

Excellent for starter projects and conversions, as well as daily street driving. This flywheel weighs 20 lbs 4 oz, great for rock crawlers, trucks, and anyone on a budget. Looking for a bit more performance and less rotating mass? Check out the 13 lb XAT Chromoly Flywheel instead!! 

Our flywheel utilizes the proven torque holding clutches of the SW20 MR2 TURBO 3S-GTE. We offer clutch setups to suit everything from a stock engine all the way up to 680 FT/LBS with this flywheel! 

For installation when using the optional ARP bolt kit, torque to 70 FT/LBS using red thread locker/loctite on the bolts, and tightening in a star pattern, not one next to the other. We also recommend tightening down in 2 or 3 passes as well, instead of going from finger tight straight to 70 ft lbs. This flywheel does NOT require any spacers to bolt on, not even the factory spacer that goes from the crankshaft to the factory flex plate. 

This flywheel is meant for our W55/W58, R150/R151, R154, KA, and SR transmission adapters. This will NOT work with our CD009 / JK series Nissan 6 speed adapter! Also not meant to fit international H151 models

Sticking with the stock rods for your rebuild? Make sure you grab these upgraded ARP rod bolts to keep them together! These are a great option for budget builds, especially if you will use a set of pre94 rods. Full set for your UZ V8! (NOT MEANT FOR AFTERMARKET RODS)

For higher HP builds (especially if your engine sees boost), we recommend upgraded rods as shown below, which include the rod bolts with them. These ARP rod bolts however are more than adequate for a fresh stock rebuild. ARP2000 bolts are also an option!

LISTING IS FOR HEAD STUDS FOR 1 COMPLETE ENGINE, BOTH HEADS! 

Head studs need to be torqued to 60 ft/lbs 

XAT Racing leads the world in Toyota/Lexus V8 parts! One of the most important and integral upgrades when squeezing more power out of the UZ engines is to go with better fasteners. We've developed a custom kit (not just reused other kits) to give your V8 a bit more room to work with safely, especially if you plan on boosting it! 

What's important about these ARP studs? The factory bolts are torque to yield, meaning they are purposefully stretched after one use, and cannot be safely reused. These ARP studs can be used countless times in multiple engine builds, provided they are not stretched. Studs also give you a more solid clamping force over bolts. Check out the excerpt from ARP's catalog for an explanation we have in the pictures! 

For those looking to run more boost, more power, or just want added safety, we have also developed an ARP2000 version of our head stud kits! The added tensile strength of the ARP2000 material lets you torque the studs down further, giving you even more protection from lifting the heads and/or blowing a head gasket.

You should not have to shave the head studs down for the scissor gears for the cams. We include washers for non-VVTi applications to make installation easier.

LISTING IS FOR HEAD STUDS FOR 1 COMPLETE ENGINE, BOTH HEADS! 

Head studs need to be torqued to 70 ft/lbs 

If you are building a bullet proof UZ series V8, you will need the ARP Stud kits found here. If you're building a HIGH HP UZ, you'll definitely need this ARP2000 version. XAT Racing leads the world in Toyota/Lexus V8 parts! One of the most important and integral upgrades when squeezing more power out of the UZ engines is to go with better fasteners. We've developed a custom kit (not just reused other kits) to give your V8 a bit more room to work with safely, especially if you plan on boosting it! 

What's important about these ARP studs? The factory bolts are torque to yield, meaning they are purposefully stretched after one use, and cannot be safely reused. These ARP studs can be used countless times in multiple engine builds, provided they are not stretched. Studs also give you a more solid clamping force over bolts. Check out the excerpt from ARP's catalog for an explanation we have in the pictures! 

The added tensile strength of the ARP2000 material lets you torque the studs down further, giving you even more protection from lifting the heads and/or blowing a head gasket, and is good for engines making 800+ HP

You should not have to shave the head studs down for the scissor gears for the cams. We include washers for non-VVTi applications to make installation easier.

Both (left and right side) head gaskets for your UZ engine rebuild! We only offer multi layered steel head gaskets for these, as they're tried, tested, and true. Please note if you do not select the OEM size, this order will be for Cometic gaskets. It often takes 8+ weeks for those to be custom made.

Please note the head gaskets are some of the only parts different between the different UZ engines, and you will need to select which engine you need these for specifically. Some of the few parts that do not interchange between the UZ engines are the head gaskets.

1UZ VVTi gaskets fit 1UZ non VVTi as well!

We offer an exclusive UZ engine torque plate for those that want to properly hone the cylinders on their Toyota/Lexus V8s! These fit all UZ engines with factory sleeves.

Any serious engine builder will tell you that you need a torque plate in order to provide a similar stress pattern on the block that it experiences with the head on the block.

Some builders even go as far as putting an old head gasket between the block and plate, then go through a standard Toyota pattern for torquing down the bolts/studs.

This is a precision machined torque plate, manufactured out of 2.0" (50.8mm) thick 6061 T6 aluminum (precision CNC'd by our own machine shop in the USA). Aluminum was chosen, as it best replicates stress and strain coefficients of expansion during torquing that the factory aluminum head does.

It has an overbore that will allow for plenty of room for honing and boring as possible, so if you are building a setup with stock or slightly larger bore, you won't have an issue.

They also get shipped in a sturdy container for protection.

These are quite possibly the only ones on the market anywhere, so instead of charging up to $800+ for these units, we thought we would bring it to the market for a reasonable price!!

You can expect one to ship next day typically, as we have one on the shelf at all times!

These are available for shipment outside the USA if required as well!

A torque or honing plate is critical when doing the hone/bore process on any engine build, especially those that will be running a boosted setup and ARP head studs. Performance studs are typically torqued at much higher values than standard OEM studs, which causes a deflection in the cylinders if not using a torque plate.

We are also offering a rental service to use the ARP head studs that can be shipped with the plate. If you go this option, you will also be charged $15 to rent them, which we will subtract from the deposit once it is returned to us. Rental service is for 1 week only. Made in the USA!