Select your vehicle
PHR PowerHouse Racing Triple Walbro 485 Fuel Pump Hanger for Lexus IS300 GS300
We have worked with PHR since 1998 and can provide unparalleled service with any PHR product you may desire. Whether we have it on our site or not, just call or shoot us an email and we will take care of you.
With a Flow Rating of over 800 lph or 267 Gallons per hour at 90psi, this pump setup is good for over 1900 HP on Race Gas, 1400 HP on E85!!!
Power House Racing and SupraStore are proud to offer a legitimate solution for a hanger for the IS300, and GS300 platforms. Use it to install 1, 2 or 3 fuel pumps. For too long IS300 and GS300 owners have had to come up with compromises in fuel systems. PHR tackles this problem with the Triple Walbro 485 fuel pump hanger.
With integrated billet high flow jet pump (siphon valve), this is the complete solution for fitting these pumps in the IS300 or GS300 fuel tanks. No hacking stock parts to try to keep from running out of fuel at 1/4 tank.
We have also added the option to add the fuel pressure regulator, fittings for OEM fuel rail fitment, and a feed/return hose kit with AN hose ends for the hanger and rail. Perfect fitment, tons of R&D hours. Attaches directly to the OEM factory tank.
This triple pump hanger features:
T6 6061 construction
Exact fit to the OEM tank
Fittings supplied with each hanger
Mil-Spec Circular Connectors and wiring
All applicable hardware
Anodized Black for E85, Methanol, and other chemical resistance. PERFECT FITMENT, PRECISION CNC MACHINING!
Quality tapped holes to ensure clean threads.
Aluminum Barb to prevent corrosion between dissimilar metals.
All PHR Hangers use Mil-Spec M22759/16 Tefzel wire.
Pumps can be triggered individually in staged sequence (and should be).
Anodized black! This will ensure these hangers can be used permanently in alcohol / methanol / E85 fuels with no concerns of long term corrosion to the hanger.
Teflon Hoses, fully compatible with any fuel type.
Two outlet ports and single inlet port. All completely configurable for your specific fuel line setup.
Parts are milled at a slow feed rate to ensure a better finished product.
Quality tapped holes to ensure clean threads.
Aluminum Barb to prevent corrosion between dissimilar metals.
All the PHR kits come with MILITARY GRADE coated wires specifically for fuel submersion. We sourced and tested these long term at great personal expense. This was actually the single hardest part for us to come by and solve the issue of fuel soak in cheaper wire some were having.
- Shipping info
We deliver worldwide
- Payment methods
- Outlet StyleDual -8 AN, Dual -6 AN, Single -10 AN
- Return Fitting-6 AN, -8 AN
- Fuel Pumps with Sock FiltersOne pump, Two pumps, Three pumps, None (supplying own)
- PHR Wiring HarnessDual Pumps, Triple Pumps, None (will wire in yourself)
- Fuelab FPRYes!, No
- IS/GS Feed Hose KitDual pump feed, gas only, Dual pump feed, E85 only, Triple pump E85 feed, None
- IS/GS Return Hose KitGas only, E85 compatible, None
Most product ships from either the manufacture or largest wholesale location to pass the saving to you. Most orders will ship via UPS, as we will be able to provide the best rates and have had the least issues when using UPS.
IF YOU DO NOT LIKE THE AUTOMATED SHIPPING CALCULATOR'S RATES, PLEASE CONTACT US AND WE CAN GET YOU A BETTER ONE! Especially for anyone outside the USA, please contact us with a list of parts you'd like to order, and where you are located.