SuperTech UZ VVTi Oversized Valves 1UZ 2UZ 3UZ +1.5mm

TEVI-1093D and TIVN-1093D oversized valves by SuperTech for all 98+ UZ engines

This is a full set of Super Tech +1.5mm oversize valves for all VVTi UZ engine heads and all 2UZ heads, both intake and exhaust. For those looking to squeeze the most out of their Toyota/Lexus UZ V8, we have you covered! Please note these do not fit the 1989-1997 1UZ Heads

Features:
☼ The microhardness is higher than the stainless steel base material, keeping good ductility beneath the hard nitrided layer (microhardness is 800HV minimum)

☼ Surface finish is smoother than with chromed stems, having less friction between stem and guide.

☼ Valve seat surface is harder with the nitrided layer, lasting longer with lead free fuels, alcohols, nitro or other "explosive" mixes. Matches any kind of seats (nodular iron seats, steel powder metal seats, hard aluminum-copper seats or beryllium copper seats).

☼ Higher rpm's engines take full advantage of all previous features. The higher the engine speed the bigger the power loss due to internal engine friction! The black nitride layer reduces this power loss due to less valve-guide friction.

☼The nitrided layer is adhered to the base material at a microscopic level, so does not "flake" or brake when the valves bend due to impacts with the pistons.

☼ The Black Nitride applies to the whole valve while the chrome coating is only applied to the stem.

☼ All valves are swirl polished, have stem undercut and a hardened tip

Intake:
Head Diam: 36.00mm (+1.5)
Stem Diam: 5.48mm
Length: 95.05mm
Part Number: TIVN-1093D

Exhaust:
Head Diam: 30.50mm (+1.5)
Stem Diam: 5.47mm
Length: 95.10mm
Part Number: TEVI-1093D