XAT QuarterMaster 8.5" Twin Disc Clutch Kit 1UZ 2JZ 1GZ CD009 V160 R154 etc

This is a complete kit, with twin disc clutch assembly, install kit (ARP flywheel bolts, clutch hardware), button flywheel, and spacer as needed. 

Which engine? Which transmission? All of them! 

We have a version for your JZ, UZ, or GZ engine, with Z33 / Z34 trans, R154, V160, or W58! The twin disc is recommended for 800rwhp cars for street/drift/endurance. The sintered metallic compound is one of the highest quality materials for clutches. This clutch has slots between the segments to help cool the clutch easier, and extra thick padding to last through an extreme amount of abuse! 

All feedback for this clutch from our many customers over the years has been overwhelmingly positive. Clutch pedal isnt overly aggressive, it can still slip for street driving, yet has no problem holding gobs of power. Here at XAT, we often measure power in gobs. This kit holds "many" gobs. This is the QMI 8.5 inch version we recommend most for street driven cars. 

The starter gear includes the ring gear needed to start the car. The much smaller button flywheel has much less rotating mass to deal with and works very well, but has no starter motor engagement. The base kit includes the button flywheel, with an option to have a full size flywheel and clutch combo. The assembled RaceLyte clutch and flywheel weighs 22 lbs 14 oz. 

If this is your first time with an XAT clutch conversion, you will need the starter gear as well. Otherwise you can opt for the full size street flywheel instead and not need the starter gear or the button flywheel. You will need to use a 3/4" master cylinder in tandem with the TOB we use.