• Now AcceptingPayPal
    0

Select your vehicle Select your vehicle

Select your vehicle
Universal Race Car UZ V8 Full Harness

Tweak'd JZ Full Engine Wiring Harness 2JZ 1JZ GTE

These are custom made to order. Expect to send in your original harness, and minimum of 10 week wait time

Not rated yet
0
Vehicle Specific
  • $1,395.95
 
OR

This listing is for a brand new engine harness swap into your favorite chassis. These wiring harnesses are built using new wire, new OEM terminals, and new OEM connector housings. Designed for use with the JDM ECU (High impedance injectors, MAP and IAT sensor, no MAF wiring). The only used connectors on the harness are the plugs that connect to the body harness which are taken from original core harnesses.

Available for auto or manual transmission (auto is $200 extra).  

These harnesses aren't just built and shipped it off. Every harness we build is laid out on our tried-and-true harness jigs to ensure a perfect fit every single time. Every detail is checked to make sure that your wiring harness is built to our standards. We don't ever send a harness to a customer unless we would happily install that on our own engine swap for our personal car. Then not one, but two engine swap experts double-check every single terminal, connector, and wire on your harness to make sure every circuit has perfect continuity. While we all know that mistakes aren't impossible, we ship every one of our harnesses with full confidence that you, our customer, will never need to use our unbeatable LIFETIME warranty on these.

    • SKU
      XAT-JZ-Tweakdharness
    • Weight
      5 lbs
    • Dimensions (L x W x H)
      10 x 10 x 10 in
  • Engine
    2JZGTE non-VVTi, 2JZGTE VVTi Aristo, 1JZGTE non-VVTi, 1JZGTE VVTi JZX100, 1JZGTE VVTi JZX110/JZS171, 2JZGE VVTi, 2JZGE non-VVTi, 2JZGTE VVTi Supra
  • TPS
    Factory (matches throttle body), Q45 TPS w/Nissan 3 pin Plug, Toyota 4 pin, with 6 pin GTE IAC Valve, Toyota 4 pin, with Ford IAC Valve, Toyota 4-Pin, with No IACV, VQ35 DBW Throttle, Bosch DBW Throttle
  • Temp Sending Unit
    Round Plastic Connector, Metal Spade Terminal, Metal Ring Terminal, Use original from supplied core
  • Oil Sending Unit
    Round Plastic Connector, Metal Spade Terminal, Metal Ring Terminal, Use original from supplied core
  • Boost Control Solenoid
    No, Yes, weatherpack 2 pin
  • Fuel Pressure
    No, Yes, 3 pin psi sensor
  • Oil Pressure
    Yes, 3 pin psi sensor, No
  • Clutch Pressure
    No, Yes, 3 pin psi sensor
  • Exhaust Backpressure
    No, Yes, 3 pin psi sensor
  • Coolant Pressure
    Yes, 3 pin psi sensor, No
  • Flex Fuel
    No, Yes, Continental sensor, Yes, ProEFI sensor 4 pin
  • O2 Sensor Type
    Toyota JDM 3 Pin, Standard Toyota 4 Pin, VVTi Toyota 4 Pin, AEM LSU4.2 Wideband, AEM LSU4.9 Wideband, ProEFI LSU4.2 Wideband, ECU Master Classic LSU4.2, ECU Master LSU4.9
  • IAT Sensor Type
    Factory Toyota IAT Sensor, Aftermarket / GM IAT Sensor, DTM 2-Pin (AEM and Haltech), None, IAT in MAF Sensor (VVTI engines)
  • MAP Sensor Type
    Factory Toyota MAP Sensor, Aftermarket / AEM MAP Sensor, Link 2,3,4 bar MAP (DTM 3-Pin), None, Onboard MAP (Haltech Elite/ECU Master), not recommended
  • Throttle
    Cable Actuated, Electronic DBW
  • Transmission Type
    Manual Nissan Z 6 Speed (CD009, etc.), Toyota Automatic (ECU must match trans), Unlisted (Contact us), Manual R154, Manual V160, W55/W58, KA/SR Nissan 5 speed, GM T56, with GM VSS, GM T56, with Ford VSS, GM T56 – Grannas Racing Bluetooth VSS
  • Alternator Plug
    Round, Oval, Newer 2UZ Sequoia 4 pin
  • Engine Management
    Factory ECU, Haltech Elite 2500, Haltech PS2000, AEM Infinity 708 / 8, AEM Infinity 508 / 8h, Other aftermarket EMS (contact us), AEM Infinity 506 / 6, ProEFI 128, LinK G4+ Xtreme, LinK G4+ Storm, LinK G4+ Thunder
  • Starter Plug
    Square (older), Round (newer)
  • MIL-Spec Firewall Connector
    Tweak'd anodized plate and grommet, MIL-SPEC connector and plate (manual trans only, may require extra plug), No, Reuse firewall bulkhead grommet
  • Loom Type
    Standard (Braided pigtails with split braided on main loom), Full braided sleeving (non serviceable)
  • Injector Type
    Denso / ID2000 / JDM High Impedance, EV1/Bosch Square Style, ID1000/1050x/1300/1700, USCAR, or EV14, USDM GTE Low-Impedance, EV1/Bosch Low-Impedance
  • Coil Pack/Ignition
    Stock 1JZ/2JZ non-VVTi Igniter and Coils, Stock 1JZ/2JZ VVTi Igniter and Coils (3-coil waste spark), Toyota 1ZZ/1NZ COP (Celica, etc), 1ZZ Toyota Smart Coils, GM LQ9/LS2/LS3 Smart Coils (x6), R35/VR38 GTR COP, Audi/VW COP, IGN1A COP 6 coil
  • Chassis
    MkIV Supra N/A 93-97, MkIV Supra turbo USDM 93-98, Mk3 Supra 86.5/87 (Core required), Mk3 Supra 88/early 89 (Core required), Mk3 Supra 89.5-90 (Core required), Mk3 Supra 91/92 (Core required), SC300 92-94, SC300 95-97, SC300 98/99, S13 Nissan 240SX (Core required), S14 Nissan 240SX (Core required), FD RX7 (Core required), IS300 2001 Dual ECU (Core required), IS300 2002-2005 Dual ECU (Core required), IS250/IS350 Dual ECU (Core required), FRS/BRZ/86/GT86 Dual ECU (Core required), Other Dual ECU (BMW E46+, G35/350Z, S2000, etc. (Core required), Universal (not chassis specific)
  • Intake Manifold
    Factory, Aftermarket Hypertune style (bottom mount IAC)

Most product ships from either the manufacture or largest wholesale location to pass the saving to you. Most orders will ship via UPS, as we will be able to provide the best rates and have had the least issues when using UPS.


IF YOU DO NOT LIKE THE AUTOMATED SHIPPING CALCULATOR'S RATES, PLEASE CONTACT US AND WE CAN GET YOU A BETTER ONE! Especially for anyone outside the USA, please contact us with a list of parts you'd like to order, and where you are located.

We accept the following payment methods:

Also Venmo and unmarked nonsequential dollar bills

  • Fitment Type
    Vehicle Specific
MakeModelYearSubmodel
Toyota/LexusLexus GS/Aristo1992-1997 S1472JZ-GE/2JZ-GTE 3.0 I6
Toyota/LexusLexus GS/Aristo1998-2005 S1602JZGE/2JZGTE 3.0 I6 (98-05) JZS160/JZS161
Toyota/LexusCrown (hardtop)1995-19992JZ-GE 3.0 I6 Royal Saloon, Royal Saloon G, Royal Touring (JZS155)
Toyota/LexusChaser, Mark II, Cresta1996-2001 X1001JZ-GTE VVTi 2.5 I6 turbo Tourer V
Toyota/LexusChaser, Mark II, Cresta1996-2001 X1001JZ-GE VVTi 2.5 I6 Tourer S, Avante/Grande
Toyota/LexusCrown Majesta1995-1999 S1502JZ-GE 3.0 I6 (JZS155)
Toyota/LexusLexus SC/Soarer1992-2000 Z302JZ-GE 3.0 I6 JZZ31
Toyota/LexusLexus SC/Soarer1992-2000 Z301JZ-GTE 2.5 I6 turbo JZZ30
Toyota/LexusSupra1986.5-1992 A701JZ-GTE 2.5 TT I6 JDM 1990-1993 JZA70

Refund, Returns and Cancellation Policies: all returns are subject to the restocking fee as per the provider of the part. Engine internals are non-returnable due to their nature.

Customers who viewed this product also bought