Search

This is a complete kit, with twin disc clutch assembly, install kit (ARP flywheel bolts, clutch hardware), button flywheel, and spacer as needed. 

Which engine? Which transmission? All of them! 

We have a version for your UZ engine, with Z33 / Z34 trans, R154, V160, or W58! The twin disc is recommended for 800rwhp cars for street/drift/endurance. The sintered metallic compound is one of the highest quality materials for clutches. This clutch has slots between the segments to help cool the clutch easier, and extra thick padding to last through an extreme amount of abuse! 

All feedback for this clutch from our many customers over the years has been overwhelmingly positive. Clutch pedal isnt overly aggressive, it can still slip for street driving, yet has no problem holding gobs of power. Here at XAT, we often measure power in gobs. This kit holds "many" gobs. This is the 8.5 inch version we recommend most for street driven cars.

The starter gear includes the ring gear needed to start the car. The much smaller button flywheel has much less rotating mass to deal with and works very well, but has no starter motor engagement. The base kit includes the button flywheel, with an option to have a full size flywheel and clutch combo. The assembled RaceLite clutch and flywheel weighs 22 lbs 14 oz.

If this is your first time with an XAT clutch conversion, you will need the starter gear as well. Otherwise you can opt for the RaceLite flywheel instead and not need the starter gear or the button flywheel. You should be using a 3/4" master cylinder in tandem with the TOB we use.

XAT Racing Toyota Lexus 1GZ V12 Lightweight Billet Aluminum 13.5 lb Flywheel for CD009 Nissan Infiniti 6 speed 350Z 370Z G35 G37 Manual Transmission Swaps

For this setup, XAT started completely from scratch, as nothing beats a purpose built billet part from the ground up! As we continue to partner up and offer more and more options for the increasingly popular Nissan 350Z/370Z 6 speed-known to handle over 800 HP at the wheels without opening it up, we continue to bring custom bespoke and billet parts to replace the aged V160 and R154 options. 

These Nissan trannies have been proven that they are a stout and reliable trans that is inexpensive, readily available, and will be for many years to come. Although the early years proved to be troublesome with the CD001, CD003, and CD005 transmissions, by the CD008 and CD009 revisions, shifting has been improved, smoothed out, and solidified. The newer JK40C 370Z transmissions are also reported to have the same internals carried over from the CD009. 

This will fit all versions of this transmission: CD001, CD003, CD005, CD008, CD009, JK41A, JK41B, JK40C, 1EA0A, and 1EA0B Our light weight flywheel is infinitely rebuildable with replaceable friction surface disc, and at just under 14 lbs, it feels right at home both on the street and at the track. Flywheel bolts get torqued to 80 ft lbs. Dont forget to do so in a cross pattern! Single disc clutch options will be anything "off the shelf" that fits the 300ZX turbo (Z32). 

Please email us if you have ANY questions or need assistance with choosing the right clutch for your build! 

** We sell clutch kits to fit this flywheel, ready to go! ** 

As a quick recap: You will need the JZ J3 automatic bellhousing, as well as our adapter kit (or SupraStore's), if you haven't converted already. We also have twin disc QuarterMaster clutches (7.25" and 8.5" twin disc) and flywheels. We offer a QM throw out bearing for fitment. The twin disc clutch kits do NOT use this flywheel, they use a "button flywheel" instead.

These are custom made to order. Expect to send in your original harness, and minimum of 10 week wait time.

Finally, a full harness for your V8 swap to make things much easier! We've done more than a few over the past decade, and now we're teaming up with the renown Dr. Tweak to offer a top shelf harness and their lifetime warranty! 

These harnesses are all custom made for each individual application, so in many cases, we will need a core harness to start with. Expect to need to send in your UZ harness, as well as your intended chassis' factory engine harness, depending on which it is. Connectors typically do not get reused from the original harness'; we just need them to verify connector type and length as the UZ engines have a variety of harness differences depending on year and chassis.

Please contact us and let us know directly what your application will need regardless, and we'll be happy to get another UZ powered vehicle out there tearing it up!! As of right now, we only have support for automatic transmissions if you run the factory ECU for them. 

Standalone applications will require a dual ECU setup in most newer 1998+ chassis'. On Toyotas specifically, the factory chassis ECU gets retained for MultiPlex compatibility, meaning the factory ECU will control the A/C, gauge cluster, throttle, auto transmission, ABS, etc. Feel free to reach out to us with what your swap is and we can make sure you get the right price and harness for your application!

For this setup, XAT started completely from scratch, as nothing beats a purpose built billet part from the ground up! As we continue to partner up and offer more and more options for the increasingly popular Nissan 350Z/370Z 6 speed-known to handle over 800 HP at the wheels without opening it up, we continue to bring custom bespoke and billet parts to replace the aged V160 and R154 options. 

These Nissan trannies have been proven that they are a stout and reliable trans that is inexpensive, readily available, and will be for many years to come. Although the early years proved to be troublesome with the CD001, CD003, and CD005 transmissions, by the CD008 and CD009 revisions, shifting has been improved, smoothed out, and solidified. The newer JK40C 370Z transmissions are also reported to have the same internals carried over from the CD009. 

This will fit all versions of this transmission: CD001, CD003, CD005, CD008, CD009, JK41A, JK41B, JK40C, 1EA0A, and 1EA0B Our light weight flywheel is infinitely rebuildable with replaceable friction surface disc, and at just under 14 lbs, it feels right at home both on the street and at the track. Flywheel bolts get torqued to 80 ft lbs. Dont forget to do so in a cross pattern! Single disc clutch options will be anything "off the shelf" that fits the 300ZX turbo (Z32). 

Please email us if you have ANY questions or need assistance with choosing the right clutch for your build! 

** We sell clutch kits to fit this flywheel, ready to go! ** 

As a quick recap: You will need the UZ V8 automatic bellhousing, if you haven't converted already. We also have twin disc QuarterMaster clutches (7.25" and 8.5" twin disc) and flywheels. We offer a QM throw out bearing for fitment. The twin disc clutch kits do NOT use this flywheel, they use a "button flywheel" instead.

These are custom made to order. Expect to send in your original harness, and minimum of 10 week wait time

XAT QuarterMaster 1UZ Twin Clutch Kit