Search

Mishimoto Radiator Hose Kit S13 S14 240SX 180SX Silvia KA24 

Mishimoto Nissan Billet Oil Filler Cap KA24 SR20 RB20 RB25 RB26 VG30 VQ30 VQ35 VH45 VK56 CA18

With plenty of different fitments, these flywheel bolts are most likely the ones you need. These are used to bolt the flywheel to the crankshaft. Includes moly lube! Specific fitment includes but is not limited to:

☼ XAT Racing R150, R151, R154 etc. 1UZ/2UZ/3UZ Manual Transmission Adapter

☼ XAT Racing W55, W58, etc. 1UZ/2UZ/3UZ Manual Transmission Adapter

☼ XAT Racing KA24 / SR20 1UZ/2UZ/3UZ Manual Transmission Adapter

Please note these will NOT work with multi disc clutch kits (such as our QuarterMaster twin disc kits). Please reach out to us if you have those applications. These bolts are also meant for the above manual transmission swaps only, not the factory automatic.

Mishimoto Aluminum Fan Shroud Kit Nissan S13 S14 240SX Silvia

Mishimoto Radiator Hose Kit SR20 Swap, whichever color you'd like! Among the 3. Otherwise, you'll just have to squint and pretend. Or try painting them or something, which could be fun to figure out with silicone. If not picking black, please check with us on availability.

This radiator hose kit is for SR20 swapped S13s and S14s, not factory USDM KA24 engines, from 1989 to 1998

*Mishimoto Radiator Hose Kit*

Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.

Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.

*Specifications*
* Interior Color: Orange
* Interior Material: Nomex
* Exterior Color: Black/Blue/Orange/Red
* Exterior Material: Silicone
* Max Temperature: 330 F

Mishimoto Radiator S13 S14 240SX 180SX Silvia

ACT HDR Clutch Kit for 1uz swap Full Disc or 6-Puck

The SPEC Stage 2 Clutch kit custom made for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines holds 398 ft lbs of torque, and is an outstanding upgrade for those with basic mods or even stock powered cars that simply want to be able to hold more power for the future. Features segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street, drag, pulling and autocross.

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around.

Required ARP Flywheel bolts are included with this flywheel!

Our 1UZ / 2UZ / 3UZ series V8 chromoly flywheel is made form some of the hardest, most durable metal we can source for a flywheel.

Our machine shop gets mad every time we do a production run--they go on and on about how hard the alloy is, takes longer to machine, wears out tooling... Well that's great news if you're planning on abusing your V8!!! This flywheel will take some serious abuse without a doubt, and we have proven it ourselves in our personal cars over a length of time.

Weighing in at just 11 LBS, you will instantly notice your V8 rev up and rev down much faster! This equates to a more responsive throttle, getting to the important parts of your powerband, and more efficient engine braking.

Our flywheel utilizes the proven torque holding clutches of the SW20 MR2 TURBO 3S-GTE. We offer clutch setups to suit everything from a stock engine all the way to to 680 FT/LBS with this flywheel!

When installing our flywheel: you will be required to install the OEM automatic bolt guide on the crank before installing the flywheel. This item is curved--the curve needs to face the engine and fit flat on the crank-to-flywheel mating surface. Please see pictures for more information as well. After installing the bolt guide, torque the included ARP bolt kit to 70 FT/LBS using red thread locker/loctite on the bolts, and tightening in a star pattern, not one next to the other. We also recommend tightening down in 2 or 3 goes as well instead of going from finger tight straight to 70 ft lbs.

This flywheel is meant for our W55/W58, R150/R151, R154, KA, and SR transmission adapters. This will NOT work with our CD009 / JK series Nissan 6 speed adapter!

SPEC Clutch Stage 1 kit for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines. Good for up to 350 ft lbs of torque. Great "stock replacement" setup for budget swaps! Features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications.

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around. This is a different clutch from the 350Z/370Z clutch, even though you are using that transmission.

There are a number of bearings that look exactly the same as these on the market, but are notoriously cheap and low quality. We recommend this one specifically.

Required adapter fittings are optional. Please note we cannot provide -3 bleed fittings the bleed side will always be -4 with our kits.

Although they do go out from time to time, we offer OEM quality replacement hydraulic release bearings for our UZ adapter kits using a single disc clutch setup. We've tested a variety of different ones over the years, and found this one to be the most reliable, especially at this price point. This functions as the slave cylinder and release bearing for the clutch, offering a universal solution instead of chassis specific, keeping costs down and require less bespoke parts.

Please note that you will need to remove the GM style fitting by driving out the retaining pin and replacing it with the AN fittings provided with the kit originally. We can also provide replacement fittings as necessary.

Since every swap and chassis is different, let us know the exact line length and fittings needed and we can also have a hose made for you! 

The SPEC Clutch Stage 2+ kit for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines uses a slightly more aggressive disc and is rated at 450 ft lbs of torque. Very streetable driving characteristics like the Stage 1 and 2, but with more holding power. 

Features a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and Kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2-plus offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, autocross, road racing, pulling, rally and drift.

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around.

This XAT flywheel is perfect for those who want a simple and straightforward flywheel for a manual conversion on their Toyota/Lexus V8. Affordable cast flywheel with OEM quality and OEM ring gear. 

Excellent for starter projects and conversions, as well as daily street driving. This flywheel weighs 20 lbs 4 oz. Looking for a bit more performance and less rotating mass? 

Check out the 13 lb XAT Chromoly Flywheel instead!! Our flywheel utilizes the proven torque holding clutches of the SW20 MR2 TURBO 3S-GTE. We offer clutch setups to suit everything from a stock engine all the way up to 680 FT/LBS with this flywheel! 

For installation when using the optional ARP bolt kit, torque to 70 FT/LBS using red thread locker/loctite on the bolts, and tightening in a star pattern, not one next to the other. We also recommend tightening down in 2 or 3 passes as well, instead of going from finger tight straight to 70 ft lbs. This flywheel does NOT require any spacers to bolt on, not even the factory spacer that goes from the crankshaft to the factory flex plate.

This flywheel is meant for our W55/W58, R150/R151, R154, KA, and SR transmission adapters. This will NOT work with our CD009 / JK series Nissan 6 speed adapter! Also not meant to fit international H151 models

This unit is a solid hub version of the stage 3. The hub is solid 8-rivet and the assembly is heat treated for strength and durability. 

Street drivable in 6 puck configuration, but not street friendly due to the rigid hub. Best for drag racing, road racing, pulling, rally and drift. Rated for 480 ft lbs

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around. This is a different clutch from the 350Z/370Z clutch, even though you are using that transmission.

This is the most aggressive single disk clutch kit from SPEC for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines, with a holding power of 670 ft.lbs! So if you make the big power, have nitrous or just like to run it very hard, then this is for you. Some light chatter and aggressive holding are common. Can be street driven if you don't mind the chatter. We strongly recommend opting for one of our twin or triple disc clutches at this power level. "Do it once, do it right!" Features a full-metallic disc with the highest possible friction co-efficient. Street drivable, but not street-friendly. The hub is solid 12-rivet and the assembly is heat treated for strength and durability. Best for extreme street and drag racing.

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around.

This is the Spec Stage 3 clutch for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines, rated for 480ft lbs. 

Features a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. 

This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around. This is a different clutch from the 350Z/370Z clutch, even though you are using that transmission.

One of the better single disc clutch kits that you can buy for manual transmission swapped 1UZ, 2UZ, and 3UZ Toyota/Lexus V8 engines. This kit will handle big power, yet is still very streetable. 

Rated for 500 ft lbs of torque The flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. 

The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rally and drift.

If you select Z33/Z34 fitment, we will provide you with the Z32TT clutch made to fit with our in house CD009 kits. We chose that clutch specifically to design the kit around. This is a different clutch from the 350Z/370Z clutch, even though you are using that transmission.

XAT Racing is proud to announce the latest single disc in house custom made flywheel option for our many UZ swap kits! Unlike our OEM style and lightweight chromoly flywheels, these aluminum ones are infinitely rebuildable with a replacement friction surface and hardware (included!). They are also tailor made for the UZ Toyota/Lexus V8s from the ground up, not re-purposed from other flywheels!! This flywheel comes in at just over 9 lbs!!

Our aluminum flywheels will use the same 3S-GTE clutches that the other flywheels and our kits utilize. We have a broad selection of choices, some of which are in stock. We will be happy to help and make recommendations for your application!

This flywheel will work with any of our W55, W56, W58, W59, R150, R151, R154, R155, KA, or SR transmission adapters. This will not work with our CD009 or JK series Nissan 6 speed kits. 

No spacers are required to bolt this on, not even the factory one that goes from the crankshaft to factory flex plate gets reused.

Ring gear is already fit, and friction surface is included with order!

Dump your WHOLE LOAD all over our full face! disc clutch. Why pay more for another clutch when this one exists? XAT is proud to announce our budget clutch kit for W55, W56, W57, W58, R150, R151, R154, and R155 fitment (as well as AR5 and KA/SR kits) when swapping to a manual transmission for your Toyota/Lexus UZ V8! We keep them in stock, so if you need it quickly, we can ship it quickly