Select your vehicle Select your vehicle

Select your vehicle

JDM X90/X100 Chaser, Cresta, Mark II

  • XAT Crown Chaser Front LS460 Brackets Mark II Front Big Brake Kit LS460 Caliper Adapter Brackets X100 JZS151 JZS155 JZX100

    After the surprise success of our 2GS/SC430 brake adapters, we've started development on an IS300 version as well! These brackets let you bolt on 4 piston LS460 calipers to your IS300 / Altezza, making an inexpensive but VERY effective brake update option! Thanks to Toyota parts interchangeability, that means they also fit Chaser, Cresta, Crown, Mark 2, Progres, and Verossa chassis'!

    In our continuing support of Lexus performance products and the UZ platform, we have finished this set of brackets to mount 4 piston LS460 / LS600h brake calipers to any USDM IS300 2000-2005!

    These brackets are ideal for those DIYers that are looking for an inexpensive option for brake upgrades. You keep your factory brake lines in this bolt-on solution; all you need is a set of front 2007-2018 LS460, LS460L, LS500, or LS600h fixed 4 piston brake calipers, LS460 fitment pads, and a set of 2008-2014 IS-F14" rotors!

    Although the roll center adjusters aren't mandatory, they provide a bolt on solution. You do not have to run them, though if you do not, you may need to modify the mounting hardware. They will improve the suspension geometry on lowered cars at any rate, so we highly recommend them.

    Please note that the LS460 does NOT use 5x114.3 rotors, so you will NOT be able to bolt on the LS460 rotor. We do not have fitment confirmation on the larger LS460 F-Sport 6 piston Brembo brakes, though they may also fit when used with larger rotors.

    Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.

    Please also note these will fit the S150 series hardtop Crown, not the Crown Majesta. The Majesta JZS155 will use our GS300 adapter brackets

    Brackets fit:

    ☼ 2001-2005 Lexus IS300 / Toyota Altezza JCE10, GXE10, SXE10

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

    ☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)

    ☼ 2000-2003 Toyota Crown GS171 (1G-FE), JZS175 (2JZ-FSE), JZS171 (1JZ-FSE, 1JZ-GTE), LS151

    ☼ 1999-2007 Toyota Crown JZS175 (2JZ-GE, 2JZ-FSE)

    ☼ 2001-2007 Toyota Progres JCG10 (1JZ-FSE), JCG11 (2JZ-FSE)

    ☼ 2001-2004 Toyota Verossa GX110 (1G-FE), JZX110 (1JZ-FSE, 1JZGTE)

    ☼ 2000-2001 Toyota Origin JCG17

    And possibly others!


    You will receive 1 pair of brackets to mount both front calipers, as well as mounting hardware. Please note that we normally stock the brackets and rotors, however it may take 1 week to ship the calipers. Please note that free shipping is for the continental US 48 states only

    Pictures show the RWD K17 type caliper being used. The AWD N18 caliper has the same bolt pattern, but the caliper sits taller on the rotor. As such, the N18 version will not work with the IS-F rotor. You'll need to stick to the K17 type. We do not support the N18 caliper, so you will need to verify before installation. We also sell the K17 calipers brand new for a very affordable rate!

    Keep in mind these are designed for off road use only and professional installation is required. We have been driving on these kits for over 3 years, but use at your own risk.

    0.0
    Add first review
    Not rated yet
    • $334
  • StopTech Cross Drilled IS-F Rotors for LS460 Upgrade Brake Kits

    So you bought one of our various LS460 upgrade brake kits, have driven thousands of miles on it, loved it, and abused the crap out of the rotors. After a wholesome amount of wear and tear, your rotors have finally fallen below 28mm of rotor thickness, and it's time to replace those tron discs for a new start.

    Say no more! These rotors are what we use in all of our LS460 5 lug brake kits, including our 2GS (GS300/GS400/GS430/SC430, Aristo), IS300, MkIV Supra, Celsior/LS400, and 5 lug 2005-2015 Tacoma. Price includes both front replacement rotors.

    0.0
    Add first review
    Not rated yet
    • $335
  • XAT JZ Pocket Port Head Refresh and Valve Job 2JZ GTE GE 1JZ VVTi or non

    Our mail-in head program for a performance refresh for your JZ cylinder head will save you $$ and outflow the factory head anywhere from 30-35 CFM on the intake ports and 20-25 CFM on the exhaust ports! Our engine building specialists include a full clean, 3 angle valve job, and pocket port for your JZ project.

    Please note shipping is not included on this listing. That will have to be quoted based off of your location. We can supply a shipping label to get your head to us if need be as well.

    See actual bench flow results of a completely stock 20+ year old head before and after porting in the second picture!

    To port or not to port, to increase valve size or not to increase valve size, 3 angle or 5 angle valve job? These are the questions any person entering the world of a reworked head ask, especially 2JZGTE owners.

    Communication is the key, so feel free to call or email us! Depending upon availability of parts and machine shop time, it may take weeks, so please plan your build accordingly. Scroll down for more info!

    0.0
    Add first review
    Not rated yet
    • $1,599
  • XAT 2GS Roll Center Adjusters Front IS300 Crown Chaser Mark II GS300 Celsior LS400

    With no other quality options on the market (Megan Racing seems to not want to make parts for our cars anymore), we did what we always do and ended up making them ourselves!

    These 30mm billet RCAs serve multiple purposes, including compensating your suspension when lowering your car and also give a bit more room to make our LS460 brake caliper kit 100% bolt on with no modifications needed!


    FITS ALL 2GS cars (98-05 GS300, GS400, GS430), 1ST gen IS300 (1998-2005), S150 Crown (JZS151, JZS155, GS151, etc.), 89-97 LS400/Celsior UCF10, UCF20, and Mark II/Chaser/Cresta X90 and X100 chassis

    0.0
    Add first review
    Not rated yet
    • $110
  • DET3 EcuMasters Digital Engine Tuner 3

    Not every customer wants to replace their proven factory ECU, nor do they have to. With the ECU Master Digital Tuner III, you maintain your factory computer and install this as a true piggy-back device. Meaning your factory computer controls all the entire car as usual, EXCEPT you now gain control over all the parameters below to off true tuning in an easy to use graphical user interface.

    This unit comes with a built-in 4 bar map sensor so you have the ultimate piggy back tuning device. Easy to use, easy to set-up with an amazing amount of engine control.

    The ECU Master is produced in Europe and is sweeping the Continent by storm. For Supra owners familiar with the HKS VPC/GCC alphabet soup combination that powered many Supra's to 800HP, this replaces that type of device and then blows it out of the water with finite control of not only fuel curves, but also ignition!!

    Features that boosted car owners love on this unit, "launch control", "boost control" "MAF to MAP auto conversion"

    0.0
    Add first review
    Not rated yet
    Universal Fit
    • $395
  • What's Involved In Importing a JDM Car? & So Called "JDM Tax"

    It's not even just JDM tax. Here's a detailed version of the process:

    First, you see what cars are available at auction. Cars typically are inspected before being listed, so any potential issues, flaws, dents, rust, paint chips/flakes/problems, etc. are typically noted. They are by no means perfect and able to find/report all of the issues with the car, and typically there's only 2-4 small pictures of the car shown. Thousands of cars are listed every day, so you are at the mercy of the inspectors and their judgment of a particular car.

    The notes that are taken on the car will be posted up with the car on the listing, but then they also have to be translated. Sometimes extra parts are included, as the company auctions it exactly as the car was provided to them. Keep in mind that the legal cars to import are all 25 years old, which means they will have 25 years worth of mileage, wear and tear, and potential issues. Fortunately, Japan is far, far better about maintaining their vehicles than Americans are. 

    Another note is that the appraiser might not know the car inside and out. They might not be a passionate enthusiast, or know a particular model very well. They might not have an eye for specifics that might differentiate one car from the next. It is up to the buyer to know what they are looking at and what they get. XAT specializes in a very specific few models, as we know these cars well. We've been able to develop experience and knowledge for them, inside and out. As such, we only import the best models and versions of these cars (Celsior, Crown, Chaser, Century, Mark II, etc.)

    When you import cars, you have to pay whoever you get it from (usually an auction yard), sometimes storage, pay the broker to place the bid, make sure it's de-registered, get the export certificate, transport from the auction yard to the dock, dock for loading, transport to the USA, dock at USA for unloading, customs fees, then you either pay the dock for the privilege of picking up your own car, or pay a transport company to deliver it to your location. There are many steps in the process, and lots of different people involved in the logistics of getting it over here. Keep in mind you have also bought this car site unseen, and by the time it arrives, it might not be in as good shape as you expected. Most cars tend to look better in pictures, and your brain fills in the blanks. On average, it's typically 2-3 months from the time of winning the auction to actually getting the car in your possession. And that's if it's legal, not counting if you purchase a car that is not old enough yet, so it has to be stored in Japan first until it is.

    Now that you have the car, you then have to get it legal in your state. In FL, if it can drive under its own power, it's legal...sort of. We don't have emissions testing like other states do. For starters, it needs to be inspected by the state (different office than the normal DMV).

    So then you have to physically take it to one of just a few locations, most of which are not local. That means paying someone or trailering it to where it needs to be. We're lucky that it's "only" 40 minutes away for us. You cant legally drive it there for the inspection, as it has no insurance, no registration, no tag, etc. Driving it there illegally is incredibly risky, and could end up costing you the whole car!

    Now that it's there, it has to pass inspection. Your local DMV most likely is not set up for this, there's separate places that are. During inspection, you have to present the proper customs forms, which have to be filled out properly by the department of homeland security, US customs, EPA, the shipping company, the export certificate that confirms the car has been de-registered in Japan, a notarized copy of the translation of the Japanese documents, etc. This process requires advanced appointment, dealing with government employees that hate doing their job and are miserable to work with, and never less than 2-3 hours out of the day. This is for each and every single car.

    Once it passes, you have to go to your local DMV and obtain a IS title for it. VIN has to be registered, etc. It's a different process for JDM cars, as they don't have 17 digit VINs and they don't have stickers plastered over every door and body panel.

    You cant register/tag it without insurance, so you need to find an insurance company that will insure the car. Once it's insured, and you get the tag, THEN it's legal to drive.

    Just because it's legal doesnt mean it's road ready. XAT inspects each and every car thoroughly. We note any maintenance that has been done, and typically any maintenance that it might further need. Every car is meticulously detailed as well. I personally use a toothbrush and wet toothpick to clean all of the creases and body lines in between the bumpers, doors, around emblems, and even windows to get as much nasty gunk out as possible. We also wash every car with Toyota brand car soap (not even kidding), claybar every car, polish every car, shampoo/vacuum the carpet of every car, condition the leather of every car, and clean anywhere and everywhere that we can to restore every car to "almost new" status again! In many cases, air pollution will have given the car a slight brown haze, so we do our best to remove that as well. It may take 20 man hours for each car to be truly ready for sale.

    We dont import just any old JDM car that seems cool either. There are very specific particular models we target to bring over, and theyre always the best we can get, especially bang for the buck! For instance, with the 10th generation Crown, we do not bring over anything less than the 2JZ spec hardtop cars. The smaller sedan version with framed windows, we pay no attention to. We specifically target the earlier zenki models (1995-mid 1997) as they have the best platform to start with. Typically, we aim for Royal Touring 2JZ spec (with Toyota's first 5 speed automatic), or Royal Saloon G models, which include power rear seats, rear A/C, and nearly every other option from the factory.

    When it comes to Celsiors, we stick to a few specific trim levels, depending on what car someone might have in mind. The B type is the more "sporty" option, with active TEMS shocks and suspension, while the C type has a comfy air ride that can be raised or lowered with a controller. We also occasionally get the eR spec, (European style), which includes leather, sunroof, and Autobahn tuned springs, shocks, steering rack, upper arms, bushings, etc. While you may see similar JDM cars listed for sale, often for less money, they typically are missing some of the best options these cars came with. And that's what we provide our customers with.

    Another thing to consider: in Florida, you are only allowed to buy/sell 3 cars in any 12 month period without getting a dealer's license, which requires a brick and mortar location zoned for commercial etc. etc. That's an entirely separate process that has its own share of months and months worth of headaches.

    XAT Racing is FINALLY a car dealer once again. We have gone through the necessary legal process to be a legitimate car dealer legally. We've risked many thousands of our own dollars out of pocket just to start the process.

    0.0
    Add first review
    Not rated yet
    • $0
  • Upgraded 2JZ or 1JZ Alternator 1993-1998 155 Amps or 200 amp 2JZGTE 1JZGTE 2JZGE

    APPLICATION: 1993-1998 Supra 2JZGTE (Turbo), 1JZGTE, and 2JZGE (Non-Turbo), IS300, GS300, SC300, etc.

    PLEASE CHECK AND VERIFY (MATCH) THE PLUG YOU HAVE ON YOUR ALTERNATOR

    This alternator is 100% plug n' play, direct fit, with no adapters, spacers or rigging like other kits. This is not a Sequoia alternator, which does require modifications to fit.

    As you may know, the stock 1993-1998 Supra alternator provides 90amps/105amps (6sp/auto) of current flow at maximum output. When you install electric fan's, a cranking stereo system, and other electronic gadgets this presses the factory alternator to it's limits.

    In some situations with the air conditioner running, electric fans going, dual fuel pumps, and more, there is simply not enough current to keep the battery at a constant state of charge. If you mix-in a large current draw from car stereo amplifiers, your electrical system will stop producing enough current, voltages across the system which drop to the lower end of the scale, and major issues can (and will) happen!

    The last thing in the world you want is your aftermarket equipped 2JZGTE running big boost on multiple fuel pumps with all your other goodies on and then lose some current to the fuel supply! As Goose said to Maverick in Top Gun, "this is not good, Maverick."

    We have looked for quite some time for an upgraded alternator that was robust, had increased current capacity, good-looking, cost-effective and would fit properly in the 1993-1998 Toyota Supra! Well, good news is that we have just the units! Our 155amp HOT RATE alternator kit is now available. The alternators are tested HOT, which means the output is guaranteed during typical automobile standard conditions. Most every other manufacturer releases their current ratings COLD, which can change the current output vs. hot by 10-15% simply on resistance losses at higher temperatures.

    Fit and finish are excellent and it is a plug-n-play installation.

    These units do not require a core charge. We usually stock these, but even if out of stock, build-time is only 72 hours. Six month warranty.

    * Custom hand wound heavy gauge stator with high temp. insulation. Fully re-manufactured.

    * Highest quality Internal electronic voltage regulator.

    * Oversized bearings with high temp. grease for durability.

    * Heavy duty rectifier plate with high amp diodes.

    Our alternators are hot-rated, not cold-rated like all the other guys, which translates into, real-world amperage ratings.

    These units are completely re-manufactured from original units (see above bullets for highlights)internals rebuilt and then the magic begins. As with any alternator they produce current based upon the coil windings and rpm's. The coil windings is where the current capacity is created, so it is based upon the capacity of the wire and number of windings on the coil.

    Without over simplifying the process, we simply use a higher current (and more expensive) wire and provide additional windings inside the unit. The higher quality wire allows more current and heat to be handled, and the increase in quantity of windings increases the overall capacity. Then the internals are matched with higher capacity components for a matched-internal device with external results.

    Bottom-line: you get a re-manufactured alternator, designed to produce more clean current then the factory original.

    For 1JZGTE owners, this is NOT the 2JZGTE alternator, it is a 1JZ with the correct round 3 pin plug for the JZA70 Supra and is rated at ~140 AMPS. 50 more amps than you stock unit! If your 1JZGTE alternator is from a Soarer or Chaser, then please select the appropriate version from the drop down menu. 1JZ owners, please include what style connector your harness has, round or oval/rectangular

    Application Note: This alternator will fit all 1993-1998 Supra Turbo and Non-Turbo Supra's, both automatic and 6 speed, Japan Spec, UK Spec, Euro Spec and US Spec. Direct fit, period.

    International shipping: You will notice we have an international shipping option available in the drop down menu. While we cannot quote every country with this, it is good for much of the UK, Australia (eastern) and a few other nations. If you order the international option and for some reason the shipping is a bit more, we will notify you for your approval.

    0.0
    Add first review
    Not rated yet
    • $282
  • XAT 2JZ Metal Head Gasket 2JZGTE MHG 1.3mm Stopper 4 Layer for Supra Aristo IS300 GS300 SC300 2JZ Crown Mark II Etc.

    APPLICATION:: 2JZGTE engine (all). Standard bore, .020", 040" (86.0, 86.5, 87.0 bores). 2JZGE (non-turbo) ALL. Standard bore,.020", .040" (86, 86.5, 87.0mm bores).

    We have done it again! Since 2009 XAT has worked to bring into service the much desired 4-piece metal head gasket for the 2JZGTE engine with a true STOPPER layer. As you know the factory 2JZ head gasket is quite robust, but there is nothing that holds boost like the STOPPER designs. The problem has always been that GReddy and HKS had a lock on this market and could charge what they want! We've been using this gasket in every 2JZ engine we've build for over a decade

    NOT ANY LONGER! We have available immediately modern 4-Layer Metal Head Gaskets 1.3mm thick with the proven STOPPER layer at an affordable price, and NOT made in an Asian country!

    Explanation for the difference between the 3-layer version, and this 4-layer, and the advantages. The 4 layer version allows for thinner layers, far improving heat dissipation as there are more layers to absorb the heat. Rigidity, durability and thermal transfer characteristics far exceed standard MLS head gaskets.

    How does the STOPPER layer work? The stainless steel .015mm thick STOPPER layer features a precision "fold" which encircles the cylinders creating an additional load point for the combustion chambers. In English??? The STOPPER layers STOPS combustion gasses from escaping in the best means possible, period!

    What about the top and bottom layers? They are active control layers are micro-embosses pre-coated steel that micro-seal engine fluids at the most disciplined level possible.

    The center layer? Made out of steel, precision manufactured with the main purpose to set an accurate overall thickness tolerance for the entire gasket. This ensures even distribution of pressure in the most accurate means possible.

    XAT multi layer steel 1.3mm 2JZGE or 2JZGTE Head Gasket

    1.3mm Thickness

    4 Layer Stopper Specification Version

    87.0mm Bore (works with all bores from 86mm to 87mm)

    7.73cc Volume per Cylinder

    Our head gasket is being used by major 2JZ engine builders all over the USA, Middle East, Australia, South Africa, UK, Canada, New Zealand and even in the former Soviet States and in many nations in Europe!! Used on the ProShop 8.1 second drag Supra out of Abu Dhabi, as well as multiple other 8 second cars worldwide!

    0.0
    Add first review
    Not rated yet
    • $230
    Sorry, we only have 10 of that item available
  • HKS HiperMax S Coilovers for Chaser Crown JZS155 JZX100 JZX90 Mark II Cresta JZS151

    WE CAN GET THESE STILL, HOWEVER NONE ARE IN STOCK IN THE USA. EXPECT A WAIT TIME OF 3 OR MORE MONTHS. WE HAVE SOLD THE LAST OF OUR STOCK.

    Pictured is one of our Crowns on the exact coilovers pictured and offered with this listing!

    9 years have passed since the launch of MAXIV GT, and during that time we have developed new technologies.

    It will be a new series that has all three conventional model’s characteristics, and been evolved by damping force characteristics, durability, and beauty. The HIPERMAX S series offers the best ride in HKS suspension history.

     

     

    HIPERMAX S Technical Features

     

    Dual PVS

    We evolved the existing preload valve system to the dual preload valve system to suppress the generation of unnecessary damping force during higher piston speeds.This provides major improvement in ride comfort without influencing the driving performance.

    80300- Hipermax S dual PVS_1.jpg 80300- Hipermax S dual PVS_2.jpg

     

    Wide range damping force adjustment mechanism

    The improved shape of the Needle jet expand the range of damping force adjustment. This makes us possible to handle driving on a wider range of stages.

    80300- Hipermax S Neddle Jet.jpg

     

    Evolution of Bump stop rubber

    A new shape of bump stop rubber reduces the body roll and achieves ride comfort at the same time which cannot be achieved with general hydro bump stop rubber.

    80300- Hipermax S bump stop rubber.jpg

     

    Low friction technology

    With advanced tribology technology, we have achieved even higher durability and lower friction than conventional products. This technology contributes to improved ride quality and handling performance.

    80300- Hipermax S Low Friction.jpg

     

    3-year warranty

    Compared to the one-year warranty period of the conventional MAX IV GT series, the HIPERMAX S Series has a three-year warranty due to optimized internal parts and quality improvement.

    0.0
    Add first review
    Not rated yet
    • $1,999
  • PHR Powerhouse Racing Billet Oil Filler Cap 2JZ 1JZ

    Clean up your engine bay with the NEW Powerhouse Racing Billet Oil Filler Cap! This cap is made from billet aluminum and has the PHR logo engraved (black edition is laser etched) into it! These caps feature a raw machined finish, or optionally, a black anodized finish. Looks great with stock finish, polished, painted, or coated valve covers!

    PLEASE NOTE THIS FITS 1JZ AND 2JZ ENGINES, HOWEVER IT WILL NOT FIT ANY 7M OR UZ ENGINES (1UZ, 2UZ, 3UZ). They use a threaded screw instead of a sprung lug setup.

    0.0
    Add first review
    Not rated yet
    • $69.35
  • PHR Cam Gear Bolt with Billet Stainless Washer for 1JZ 2JZ PowerHouse Racing

    The PHR Cam Gear Bolt with Stainless Washer is the perfect finish to your engine bay. Why have a beautiful set of cam gears and ruin the look with ugly factory bolts? The PHR Cam Gear Bolt Features a tapered washer which protrudes around the bolt to give a fantastic look and clean finish. This bolt is class 12.9 which exceeds the strength of the factory spec!

    This is ONE bolt and washer. If you have a VVTi engine, you will NOT be able to use 2 of these. If you have a non-VVTi engine, you will need 2.

    0.0
    Add first review
    Not rated yet
    • $28.17
  • SupraStore ProSeries 2JZ Turbo Manifold 1JZ 2JZGTE 2JZGE VVTi or non T3 T4 T6 or V-band Inlet

    Please note these are currently built to order with a roughly 6-8 week turnaround time. Sometimes quicker, sometimes 10-12 weeks. We can't currently make any promises and are doing our best to keep up.

    If you are running a V-band inlet turbo, please let us know which one so we can weld the correct flange to the manifold. We strongly suggest finding the correct flange and sending it in to us, since there's an assortment of different v-band flanges used on the market.

    Dual wastegate manifolds may need to be modified to fit your chassis/project


    For years people have been asking why you must pay $1200+ for a turbo manifold. While we appreciate it takes time to design and fabricate a manifold, it doesn't require a $1200+ price tag.

    Our goal was under $1000 for a world-class hand-made manifold for the Supra community, which we have been a part of longer than any business on the planet. We also include a 3 year warranty on all ProSeries exhaust manifolds sold!

    Our 304SS tig welded 2JZ exhaust manifold scavenges like none other on the market, with efficient runner designs and a proven collector, which fits smaller frame to mid frame turbos from Precision, Garrett, Borg Warner and more.

    They are finished in a brushed-stainless "raw-look", but we can ceramic coat them at extra cost, if that is what you require. They are robust, handle heat cycles correctly and are guaranteed to perform.

    The No. 1 runner is designed to provide maximum clearance for larger compressor cover turbochargers, while at the same time providing for an efficient overall layout. If you plan on running a larger turbocharger than an S300 series for instance, we also make a mid frame manifold instead.

    ProSeries turbo manifolds are offered in un-divided (standard) and divided for those wanting to run twin scroll turbos, as well as Quick Spool (QSV) and Borg Warner EFR Non-Gate designs.

    ProSeries turbo manifolds are hand-made in a jig (to offer consistency) and have amazing welds, and the fitment is outstanding. The standard sized runners are 1 5/8" inside diameter and utilize .080" wall thickness stainless.

    This design allows for higher velocity exhaust energy, while still maintaining significant flow. These manifolds perform outstanding up to 1250rwhp. We have multiples customers making power numbers over that level, and running 8 flat 1/4 mi times with our manifold.

    Inside Tubing Diameter: 1 5/8"

    Wall Thickness: .080" (2mm)

    If you require a TiAL, Precision, Turbosmart gate flange, or other branded V-band flange welded in (no 2 bolt or 4 bolt ones), this is available as an option in the drop down menu. Please let us know which wastegate you will be using.

    When no wastegate flange is selected you will receive the manifold with the standard length wastegate tube "open" to mount whatever you want.

    * Quick Spool Valve Turbo Manifolds are Available. Please see our other item listing for that specific version *.

    * Our 3-year no questions covers any manufacturing related defect, including all welds and through cracking. The no questions asked warranty is for the original purchaser only. Micro-cracking of external welds in heat-cycled stainless has no affect upon performance.

    Please be aware that there may be fitment issues with the dual gate setup in some cars. Although we can weld the wastegate flanges on by request, please note that we cannot guarantee fitment with your setup, as minor modification will most likely be needed.

    Fitment will also be very tight with the Mk3 Supra frame rails if installing in an A70 chassis. In most cases, you will have to modify the frame rails/chassis, as there's not much room for fitment regardless of manifold used. Very little persuasion is required, but this is inevitable with our manifolds as we make our manifolds to fit as many different chassis' as possible. You will be better off with slightly modifying the chassis than compromising manifold design.

    As with pretty much all tubular manifolds for these engines, you can expect to either modify existing mounting hardware or use the shorter hardware kit we offer. Again, the only way to feasibly make these manifolds with thick walls and proper runner design is to have a tight fit on the flange. This is much more preferable to compromising manifold design.


    At maximum width from the head flange of the manifold, this is at its widest at about 10.75 to 11 inches, give or take

    0.0
    Add first review
    Not rated yet
    • $990
  • XAT Wilwood Front Brake Brackets IS300 Crown Chaser JZS155 JZS151 JZX100 GX100 X90 X100

    Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

    We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

    This kit is specifically designed to use MkIV Supra TT rotors, meaning you only need 17" wheels to clear these brakes, giving an extra option for those looking to keep with period correct wheels and wheel sizes. Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

    This listing includes the brackets and hardware to mount. We give the option of piecing together the rest of the kit yourself, otherwise you will need all of the dropdown menu options for 100% bolt on. These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

    As seen in the above picture, the full weight of the caliper, rotor, pads, and mounting hardware comes to 28.25 lbs!

    0.0
    Add first review
    Not rated yet
    • $289
    Sorry, we only have 9 of that item available
  • XAT Wilwood IS300 Crown Chaser Front Brake Kit BBK JZS155 JZS151 Mark II Cresta JZX100

    Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

    We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

    This kit is specifically designed to use MkIV Supra TT rotors, meaning you only need 17" wheels to clear these brakes, giving an extra option for those looking to keep with period correct wheels and wheel sizes. Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

    This listing includes everything needed for 100% bolt on operation! These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

    As seen in the above picture, the full weight of the caliper, rotor, pads, and mounting hardware comes to 28.25 lbs!

    The steering arm and caliper may need to be modified on your setup to fit this brake kit, depending on application, if youre not using an angle kit. This had to be done on our zenki '89-92 UCF10 Celsior to fit, as well as our '96 Crown JZS155. Expect similar requirements on X90s and early X100s, likely on GS/Aristo as well.

    0.0
    Add first review
    Not rated yet
    • $1,175
  • Link ECU JZXLink - JZX100X G4X Plug n Play JZX100 Chaser Cresta Mark II 1JZ VVTi

    Easy to install. Affordable. Reliable.  
    G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
    This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

    Designed for the 1JZ VVTi engine.   

    • Please check your connector matches the header in the listed photo before purchasing.  
    • This ECU works for manual transmissions only.  
    • ECU includes an onboard 4 bar MAP sensor. 
    • Most factory features are supported. 
    • Check the features tab for I/O expansion options 

    Suitable applications:  

    JZX100 with 1JZ VVTi engine

    0.0
    Add first review
    Not rated yet
    • $1,750
  • XAT Racing Crown Chaser Rear Brake Brackets for LS460 Calipers on JZS155 JZS151 JZX100 Mark II Cresta hardtop sedan

    Brackets are in stock and ready to ship!

    You've asked for it, so here it is! At long last, a viable rear brake upgrade solution to go with our front LS460 brake option!!

    With these adapter brackets, you will also need:

    • 2007-2018 Lexus LS460 rear calipers (A16 in the casting)
    • 2007-2018 Lexus LS460 rear brake pads and hardware kit
    • 1993-1998 Toyota Supra twin turbo rear rotors

    And that's it! You can reuse factory brake lines, though we strongly recommend going with stainless braided lines for your application. Our brackets include mounting hardware with every purchase.

    Fits all S150 hardtops, S150 sedans, X90s, and X100s.


    Brackets fit:

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE), LS151 (2L-TE)


    IMPORTANT: because of the size of the internal drum e-brake these cars have, you WILL LOSE E-BRAKE capability with this kit. We are developing an independent hydraulic option to replace the factory cable, however if you use the Project Mu JZX100 to MkIV Supra e-brake shoes, you should be able to retain hand brake capability.

    0.0
    Add first review
    Not rated yet
    • $265
  • XAT Racing IS300 Full Front Brake Kit Crown Chaser Mark II Big Brake Kit LS460 Caliper Adapter X100 JZS151 JZS155 BBK

    After the surprise success of our 2GS/SC430 brake adapters, we've started development on an IS300 version as well! These brackets let you bolt on 4 piston LS460 calipers to your IS300 / Altezza, making an inexpensive but VERY effective brake update option! Thanks to Toyota parts interchangeability, that means they also fit Chaser, Cresta, Crown, Mark 2, X90, X100, Progres, and VerossaX110 chassis'!

    In our continuing support of Lexus performance products and the UZ platform, we have finished this set of brackets to mount 4 piston LS460 / LS600h brake calipers to any USDM IS300 2000-2005!

    This kit is ideal for those DIYers that are looking for an inexpensive option for brake upgrades. You keep your factory brake lines in this bolt-on solution; all you need is a set of front 2007-2018 LS460, LS460L, LS500, or LS600h fixed 4 piston brake calipers, LS460 fitment pads, and a set of 2008-2014 IS-F14" rotors!

    This kit includes everything you need for a full bolt on installation for your front brakes!

    • Brand new Lexus OEM Calipers
    • XAT Racing adapter mount brackets & hardware
    • Roll center adjusters for bolt on installation
    • Cross drilled rotors
    • StopTech pads
    • Stainless braided brake lines



    Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.

    Please also note these will fit the S150 series hardtop Crown, not the Crown Majesta. The Majesta JZS155 will use our GS300 adapter brackets

    Bracket fitment:

    ☼ 2001-2005 Lexus IS300 / Toyota Altezza JCE10, GXE10, SXE10

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

    ☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)

    ☼ 2000-2003 Toyota Crown GS171 (1G-FE), JZS175 (2JZ-FSE), JZS171 (1JZ-FSE, 1JZ-GTE), LS151

    ☼ 1999-2007 Toyota Crown JZS175 (2JZ-GE, 2JZ-FSE)

    ☼ 2001-2007 Toyota Progres JCG10 (1JZ-FSE), JCG11 (2JZ-FSE)

    ☼ 2001-2004 Toyota Verossa GX110 (1G-FE), JZX110 (1JZ-FSE, 1JZGTE)

    ☼ 2000-2001 Toyota Origin JCG17

    And possibly others!


    Keep in mind these are designed for off road use only and professional installation is required. We have been driving on these kits for years, but use at your own risk.

    0.0
    Add first review
    Not rated yet
    • $1,254
  • XAT Wilwood Rear Brake Brackets Crown Chaser JZS155 JZS151 JZX100 GX100 X90 X100

    Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

    We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

    This kit is specifically designed to use MkIV Supra TT rotors and is meant to match the front kit we also sell! Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

    This listing includes the brackets and hardware to mount. We give the option of piecing together the rest of the kit yourself, otherwise you will need all of the dropdown menu options for 100% bolt on. These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

    Caliper, mounting bracket, pads, and rotor weigh a combined total of 21.6 lbs

    IMPORTANT: because of the size of the internal drum e-brake these cars have, you WILL LOSE E-BRAKE capability unless switching to the Project Mu shoes or a 2nd caliper setup.

    Brackets fit:

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

    ☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)

    With minor knuckle modifications (see last pictures above), the brackets also fit:

    ☼ 1992-1999 Majesta 2WD (JZS155 2JZ, UZS151, UZS157 1UZ), and 140 series (JZS147, JZS149, UZS141, 143, 147)

    ☼ 1991-1997 Aristo / GS300 (JZS147)

    ☼ 1991-2000 Soarer (JZZ30/31 1JZGTE/2JZGE, UZZ31 1UZFE) / SC300 (JZZ31 2JZGE) / SC400 (UZZ30, 1UZFE)

    And possibly others! We have not confirmed fitment on any other chassis/vehicle.

    0.0
    Add first review
    Not rated yet
    • $279
    Sorry, we only have 10 of that item available
  • XAT Wilwood Rear Big Brake Kit Crown Chaser JZS155 JZS151 JZX100 GX100 X90 X100

    Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

    We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

    This kit is specifically designed to use MkIV Supra TT rotors and is meant to match the front kit we also sell! As seen from the picture above, the full kit with pads, rotor, caliper, and mounting hardware weigh a total of 21.6 lbs.

    This listing includes everything you need to bolt on the full Wilwood kit that we offer to the rear: 

    • Wilwood FSL Calipers Grey Anodized
    • Wilwood BP10 Race/Street Pads
    • Wilwood Stainless Braided Brake Lines
    • Rotors, your choice of blank, drilled, slotted, or drilled and slotted
    • XAT mounting brackets and hardware
    • Project Mu D1 Spec e-brake shoes

    This kit fits:

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

    ☼ 1995-2001 Toyota Crown JZS155 (2JZ-GE), GS151 (1G-FE), JZS151 (1JZ-GE)

    With minor knuckle modifications (see last pictures above), the brackets also fit:

    ☼ 1992-1999 Majesta 2WD (JZS155 2JZ, UZS151, UZS157 1UZ), and 140 series (JZS147, JZS149, UZS141, 143, 147)

    ☼ 1991-1997 Aristo / GS300 (JZS147)

    ☼ 1991-2000 Soarer (JZZ30/31 1JZGTE/2JZGE, UZZ31 1UZFE) / SC300 (JZZ31 2JZGE) / SC400 (UZZ30, 1UZFE)

    And possibly others! We have not confirmed fitment on any other chassis/vehicle.

    0.0
    Add first review
    Not rated yet
    • $1,310
    Sorry, we only have 9 of that item available
  • XAT Racing Crown Chaser LS460 Rear Brake Kit FULL on JZS155 JZS151 JZX100 Mark II Cresta hardtop sedan

    Brackets are in stock and ready to ship!

    You've asked for it, so here it is! At long last, a viable rear brake upgrade solution to go with our front LS460 brake option!!

    This listing is for the full bolt on kit and includes:

    • 2007-2018 Lexus LS460 rear calipers (A16 in the casting)
    • 2007-2018 Lexus LS460 rear brake pads and hardware kit
    • 1993-1998 Toyota Supra twin turbo rear rotors
    • Adapter brackets and mount hardware
    • Stainless braided brake lines
    • Brake rotors
    • Project Mu D1 Spec e-brake shoes

    And that's it! You can reuse factory brake lines, though we strongly recommend going with stainless braided lines for your application. Our brackets include mounting hardware with every purchase.

    Fits all S150 hardtops, S150 sedans, X90s, and X100s.


    Brackets fit:

    ☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

    ☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE), LS151 (2L-TE)

    0.0
    Add first review
    Not rated yet
    • $1,240
  • Radium Fuel Pump Hanger Chaser Mark II Cresta X90 X100 JZX90 JZX100

    The Radium Engineering Fuel Pump Hanger is a drop-in aftermarket fuel pump solution for supplying the fuel required to maximize power gains. Fits JZX90 and JZX100 Chaser, Mark II, and Cresta

    Features
    -Drop-In Installation
    -Dual Pump Capable with Popular Pumps
    -Brushless Fuel Pump Compatibility
    -High Current Electrical Hardware
    -Anodized Aluminum Construction
    -Gasoline, Methanol, and Ethanol Compliant
    -Fuel Resistant Tubing and Wiring
    -Stainless Steel Hardware

    Multiple adapter fittings are provided for connecting back to the OEM fuel lines. If a second pump is installed, an SAE quick connector is provided that snaps into the underside of the fuel hat simplifying installation. For later model vehicles that use the inverted flare feed line, a replacement PTFE feed hose is provided, as shown in pictures.

    The custom designed stainless electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Electrical hardware is included for the fuel pump(s). Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. Relay kits, such as 17-0031, are recommended to drive these new internal fuel pump(s).


    0.0
    Add first review
    Not rated yet
    • $522.45
  • XAT Crown Chaser Rear 2nd Caliper Hand Brake Bracket LS460

    Fully delete your stock drum rear e-brake and run an independent hydraulic hand brake on your drift car! Excellent for those with Crowns, Mark IIs, Crestas, and Chasers with foot emergency brake setups that are looking to get sideways with a big upgrade!

    The caliper used is the factory rear 2 piston LS460 caliper from the non-sport, RWD cars. They are marked A16 in the casting. Be sure you have the correct ones!

    This kit works with both our rear Wilwood FSL rear upgrade kit. You will need to run our upgrade kit due to this using the larger Supra TT rear rotor. This will NOT fit a stock rear brake setup. You will also be replacing the factory drum e-brake entirely with this, so you will not be able to reuse that.

    0.0
    Add first review
    Not rated yet
    • $279
  • SOLD SOLD 1997 Toyota Chaser Tourer S JZX100

    Sold Oct 2022


    This is a very clean grade 4 Chaser! Completely stock, but with the full dealer option aero kit and TRD Sports grill! Taillights appear to be smoked in the center as well.

    0.0
    Add first review
    Not rated yet
    Regular Product
    • $19,950
    Out of stock
  • PHR Billet Main Caps for 2JZ-GTE 2JZGE

    Direct replacement for the factory cast steel main caps. CNC machined from high strength steel, these main caps will not distort under high boost/high HP levels like the factory main caps. Recommended for anyone doing 900rwhp+. You will have to line hone the main journals to ensure perfect fitment. Pairs perfectly with the ARP Main Stud Kit, available for purchase separately.

    0.0
    Add first review
    Not rated yet
    • $641.25
  • StopTech Centric Brake Pads and Hardware Kit for LS460 Front Kit

    There's a number of brake pad options out there with different compounds and capabilities. We've found the best all around option and have been using these since our very first kit in 2019.

    These pads are great for all uses: street, strip, race, drift, highway cruising, etc. Theyre dead quiet in all conditions and have great feel.

    They also come with all necessary installation hardware. Many less expensive kits out there do not include all of the needed springs/clips, and some dont include any at all! Be wary of these kits, as you will no doubt end up spending extra time and money to source the individual parts you need separately. Or you can purchase this kit, which we typically keep in stock and ready to ship next day!

    Save yourself the hassle and go with the option we selected!

    0.0
    Add first review
    Not rated yet
    • $75
  • OEM Toyota Clutch or Brake Pedal Pad

    If your Toyota was made sometime in the 80s or 90s, and it has a manual transmission, you can bet it used this pad! The clutch pedal and brake pedal both use the same pad, so if you want to replace both while you're in there, keep in mind they are priced each, so you'll need 2.

    0.0
    Add first review
    Not rated yet
    • $11.99
  • BC Brian Crower 2JZ Head Gasket 1.3mm Made in Japan

    BC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to fatigue, losing the spring effect in a relatively short period of time and consistency of sealing pressure, resulting in leakage. BC gaskets are pre-coated stainless steel with a 0.2 micron consistent layer of Nitrile rubber that completely fills the cylinder head surface. Even a newly resurfaced cylinder head and/or block has a surface finish or roughness between 10 to15 microns and this Nitrile rubber completely seals the surfaces at operating engine temperatures, unlike the FKM type which is not suitable for filling the surface roughness because the material has too high of heat resistance. Basically the FKM does not melt to fill into the surface roughness providing the proper seal.

    87mm bore, 1.3mm thickness (stock 2JZGTE thickness)

    0.0
    Add first review
    Not rated yet
    • $230
  • PHR Fuel Rail for 2JZ Powerhouse Racing 2JZGTE 2JZGE 1JZGTE

    The Power House Racing high flow fuel rail for 2JZ features a 17.5mm (-8AN) internal diameter aluminum rail for the most flow possible! Capable of fuel flow to feed over 2000 Horsepower. Please note there are several different rail fitments depending on your engine. Please make sure to select your correct application from the dropdown menu.

    The PHR Fuel Rail Kit Includes:
    High-flow fuel rail
    Mounting brackets
    Fuel Injector Bosses
    One -8AN side inlet fitting,
    One -6AN side outlet fitting,
    One -6ORB plug for the center port.

    Comes in a Black Anodized Finish. This anodizing offers protection against exotic fuels and alcohols, so it's E85 ethanol ready right out of the box!

    Must be used with 14mm injector top. Denso (HKS / GReddy style 11mm) fuel injectors will not fit this large diameter fuel rail. We recommend Victory Motorsports or Injector Dynamics injectors with these fuel rails, but there are many injectors that will work.

    Will work with factory intake manifold or Virtual Works intake manifold. Will not work with Hypertune Intake Manifolds.

    0.0
    Add first review
    Not rated yet
    • $284.05
  • Mishimoto Chaser Radiator Aluminum Performance Aluminum Radiator Mark II Cresta JZX100 96-01

    • Direct fit for the 1996-2001 Toyota Chaser JZX100
    • Full aluminum construction including durable, TIG-welded end tanks
    • 107-percent increase in core volume over stock
    • Features a three-row, 2.2-in thick, efficiently brazed aluminum core
    • Provides efficient temperature reduction on the street, track, and drag strip
    • Increased fluid capacity and optimal heat dissipation
    • Efficient temperature regulation for both stock and modified vehicles
    • Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system
    • Mishimoto Lifetime Warranty

    This item is for Manual Transmission vehicles. Vehicles equipped with an automatic transmission will require the installation of a Mishimoto Universal Transmission Cooler Kit

    Give some extra cooling power to the JZ under the hood of your 1996-2001 Toyota Chaser with the Mishimoto JZX100 Performance aluminum Radiator. Our radiator design swaps out the thin core and plastic end tanks for full aluminum construction, TIG-welded for maximum durability. The Mishimoto design also features a 2.2in thick, 3-row core for maximum cooling, no matter where ever you drive your Chaser. The Mishimoto 1996-2001 Toyota Chaser Performance Aluminum Radiator is available in a polished finish and includes the Mishimoto Lifetime Warranty for a worry-free installation.

    0.0
    Add first review
    Not rated yet
    • $405.95
  • Radium -10 AN Press In Valve Cover Fitting for 2JZ 1JZ VVTi non-VVTi UZ

    Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. Please note these are priced each, as you will need to mix and match depending on your engine model. There are 4 different types of fittings, you will need to choose each type that fits your application.

    FEATURES
    -Stainless/Aluminum Construction
    -Low Profile 10AN Male Fitting
    -Anodized and Laser Engraved
    -Swivel Action with FKM O-Rings
    -Simple Press-Fit Installation

    Refer to the table picture for fitment information with popular Toyota engines. If an engine is not listed, fitment information has never been confirmed.


    20-0408 COMPATIBILITY
    Toyota 1JZ-GE VVT-i
    Toyota 1JZ-GTE VVT-i

    Toyota 1JZ-GTE Non VVT-i
    Toyota 2JZ-GTE VVT-i
    Toyota 2JZ-GTE Non VVT-i
    Toyota 2JZ-GE Non VVT-i
    Toyota 2JZ-GE VVT-i (2000-May 2002 ONLY)

    NOTE: 20-0408 will work in many Toyota/Lexus models, some are listed below. If the PCV valve is mounted to the valve cover with rubber grommet P/N: 90480-18001 (shown below), than Radium P/N: 20-0408 will work.

    4RUNNER
    ARISTO
    CAMRY

    CARINA 2
    CELICA 5S-FE
    CELICA 7A-FE
    CELSIOR
    CHASER (excluding 2JZ-GE VVT-i)
    COASTER
    COROLLA SPRINTER
    CORONA FR
    CRESSIDA
    CRESTA
    CROWN (excluding 2JZ-GE VVT-i)
    ES300
    GS300 (excluding 2JZ-GE VVT-i)
    GS400
    GS430

    HIACE S.B.V
    HILUX
    IS200
    IS300 (2000-MAY 2002 ONLY)

    LAND CRUISER
    LS400
    LS430
    LX470
    MARK II
    MARK II BLIT (excluding 2JZ-GE VVT-i)
    MR-2 5S-FE
    ORIGIN (excluding 2JZ-GE VVT-i)
    SC300
    SC400
    SC430

    SEQUOIA
    SOARER (excluding 2JZ-GE VVT-i)
    STARLET
    SUPRA 2JZ-GTE
    T100
    TACOMA 3RZ-FE
    TACOMA 2RZ-FE

    TUNDRA 2UZ-FE

    0.0
    Add first review
    Not rated yet
    • $56.95
  • ATS carbon LSD for IS300 JZX100 JZS155 A70 Supra


    When looking for a Limited Slip Differential  XAT Racing always goes with Active Tracking Service - better known as ATS or even carbonetics.  These LSD kits are available in 1.5 way or 2 way operation. Silent when taking tight corners so none of the metal on metal CLUNK CLUNK of many of the other brands of LSD kits.  


    These kits ship directly from Japan -  So please expect a shipping rate of about 165 dollars on average to the lower 48 states. We can ship worldwide as well on these.


    By utilizing the CC composite discs, the ATS carbon LSD posses the superior transitional characteristics from free to differential lock, enabling control that feels quite natural.

    Principal characteristics of the Carbon LSD

    * Gentle transitional characteristics that yield ease of handling from free to lock
    * Small degree of slipping which provide a greater flexibility
    * Super durable
    * Stable differential lock performance which is unaffected by oil temperature changes
    * Quiet operation without chattering noise
    * Very high adaptability to many LSD oils from different manufacturers

    Important - it is very important to monitor the differential oil temperature to keep it under 150 C degree (302 F). Continued driving with the differential temperature above that point might cause the carbon chips peeled off.

    0.0
    Add first review
    Not rated yet
    • $1,695
  • ARP Extended Wheel Studs for Toyota Chaser Crown Mark II Supra IS300 GS300 etc.

    Price is for 2 package for 1 axle. If you need a set for the whole car, front AND rear, you will need to select that from the dropdown menu.

    Fits nearly every Toyota car from the 80s, 90s, and 2000s. Excellent for upgrading to stronger, longer wheel studs, running spacers, etc. Stock length is ~1.75", these are 2.6"

    Knurl: 0.559
    Underhead Length: 2.600
    Knurl Length: 0.180
    Thread Pitch: 12mm x 1.5 

    0.0
    Add first review
    Not rated yet
    • $74.46
  • Used 2JZGE VVTi Engine

    Please contact us for an accurate shipping quote to your location!

    What's the best 2JZ engine to start with when doing a 2JZ swap? Did you guess 2JZGE VVTi? If not, you guessed wrong. Long story short, it's the best platform to start with. Newer, more common, much more affordable, VVTi, no distributor, etc.

    Our engines are pulled usually from a GS300 or IS300. There is typically a 1 month warranty on the engine's internals. Accessories are not covered under this warranty, including alternator, A/C compressor, water pump, etc. The warranty is so you know you're starting with a good used engine...keep in mind they are still used, and regular maintenance would be wise before proceeding.

    --

    For the price of a stock used pull out 2JZGTE, you could have a fully built with brand new forged internals 2JZGE and get much better results. We've sold full 2JZGTE engines for over $12,000 now; people really want to buy that T in the name!

    We find it amazing that even more than a decade later, people are still repeating the same, wrong information. For instance, that there was never a 2JZGE VVTi engine made with turbo rods..however, every Crown we import comes from the factory equipped with a 2JZGE VVTi engine and turbo rods.

    Here's another fact: installing a turbo manifold on a GTE engine is a pain. You dont hear that one too often, but it's been true for decades. Because of the bolt pattern and port spacing on the head, compromises have to be made either in the installation hardware (see our short studs/nuts install kit) or in the runner design.

    "Okay but all of the early 2JZGE non-VVTi engines had turbo rods" - this is true. And they also had a distributor, which gets in the way of installing a turbo setup. Plus, they dont have the better 36-2 tooth resolution crank trigger wheel. Theyre also older engines, which means more likely to have more mileage/wear/tear.

    "Okay but the 2JZGE engines didnt have oil squirters" - If youre building a boosted car with forged internals, this is not necessarily a problem. Oil squirters dont work as well on forged pistons as cast pistons. PHR even makes an oil squirter block off kit for GTE engines, as that will keep oil where it needs to be; at the engine bearings and bearing surfaces, not spraying willy nilly under the piston.

    "Okay but the 2JZGTE has a place for the oil drain already in the oil pan" - so do the GE engines. They share the same casting, so it's literally as easy as drilling out the existing hole provision and installing the drain.

    "Okay but VVTi is more complicated and makes tuning more difficult" - This may have been true 15+ years ago. There have been multiple generations of ECUs that have come and gone with the capability to control VVTi. It's 2 wires, not rocket surgery. Many boosted VVTi cars will still keep the factory ECU to control VVTi, gauge cluster, ABS, throttle, etc. anyways. There's a reason all new engines have some form of variable valve timing control, and that's because among other things, it helps gas mileage and gives a wider powerband.

    "Okay but my buddy said the GTE is better" - has your buddy been actively building and providing parts to the community for over 15 years? Or did he just read what someone said on facebook, or on a forum 20 years ago?

    0.0
    Add first review
    Not rated yet
    • $1,650
    • CARB Warning

    HKS Wastegate Actuators HKS Upgraded ACT Kit JZX100

    HKS Upgraded ACT Kit JZX100

    0.0
    Add first review
    Not rated yet
    Regular Product
    • $160
    Only 1 left in stock. Available for backorder
    Sorry, we only have 50 of that item available
  • Cometic Toyota 1JZ-GTE VVTi Exhaust Manifold Gasket

    Toyota 1JZ-GTE 2.5L I6 .060 " HTS Exhaust Manifold Gasket, VVTi Only

    0.0
    Add first review
    Not rated yet
    Regular Product
    • $19.96
    Available for backorder
    Sorry, we only have 50 of that item available

Bestsellers

New arrivals

Footer navigation