Search

You've asked for it, so here it is! At long last, a viable rear brake upgrade solution to go with our front LS460 brake option!!

This listing includes EVERYTHING you need to bolt on this brake kit to your Crown, Chaser, Mark II, or Cresta

And that's it! You can reuse factory brake lines, though we strongly recommend going with stainless braided lines for your application. Our brackets include mounting hardware with every purchase.

Fits all S150 hardtops, S150 sedans, X90s, and X100s.

Kit fits:

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE), LS151 (2L-TE)

IMPORTANT: Includes adapter e-brake shoes, so you will retain hand brake capability!

Not everyone is looking to go wild with their car! We offer this as a simple bolt on solution for those with the 10th generation hardtop Crown (JZS151, GS151, JZS155, etc.) or RWD Crown Majesta (JZS155, UZS151, UZS157) who will be fine with just OEM style brakes.

Please note that we have not found a 100% direct replacement for the hardtop stock rotors. With this kit, you may need spacers to fit. You should still be able to fit the factory JZS155 15" wheels, however we have not confirmed fitment yet.

Listing includes BRAND NEW direct fitment upgrade:

• Calipers
• Rotors
• Pads

The Majesta version is direct fitment and will fit your wheels, confirmed.

As a great supplement to our turbo kits, we commissioned these hand made in the USA patch adapter wiring harnesses to plug in to the ECU Masters DET3 (Digital Engine Tuner 3) piggyback system, as well as the factory JDM 95-97 JZS155 hardtop Crown ECU and harness.

We're huge fans of the Crown at XAT, having brought over around a dozen by now. This terrific platform yearns for a turbo setup! Since a standalone ECU is not ideal for everyone or every build, we now offer this alternative that keeps all factory functions and drivability of your 2JZ VVTi Crown, but lets you fine tune further and swap out injectors for when youre ready for more power!

We strongly recommend going this route in conjunction with our turbo kit. You will be limited to wastegate pressure and low boost on the kit, unless you upgrade injectors/fuel system and go with a tunable ECU.

Fully delete your stock drum rear e-brake and run an independent hydraulic hand brake on your drift car! Excellent for those with Crowns, Mark IIs, Crestas, and Chasers with foot emergency brake setups that are looking to get sideways with a big upgrade!

The caliper used is the factory rear 2 piston LS460 caliper from the non-sport, RWD cars. They are marked A16 in the casting. Be sure you have the correct ones!

This kit works with both our rear Wilwood FSL rear upgrade kit. You will need to run our upgrade kit due to this using the larger Supra TT rear rotor. This will NOT fit a stock rear brake setup. You will also be replacing the factory drum e-brake entirely with this, so you will not be able to reuse that.

Fits 1998-2005 2JZGE VVTi engines! Includes timing belt, belt tensioner, idler pulley, bracket, water pump, O ring, and gasket, as well as replacement instructions.

Please note that almost all of these parts will fit a 95-97 2JZ Crown as well, but the water pump might not fit your application. Please keep that in mind when ordering.

Typically can ship within 3 business days! We exclusively use original manufactured parts everywhere and anywhere possible, and this timing service kit is no exception.

The OEM timing belt tensioner brackets are prone to cracking and breakage in high RPM/high HP applications. This is a well known problem, especially with higher lift cams, which turn our beloved 2JZs into interference engines!

XAT and PHR are happy to provide you with hands down the best replacement available:

☼ Fully CNC machined from billet steel, making it the strongest bracket on the market
☼ Black oxide coated to provide corrosion and extend material life
☼ Features an oil embedded bronze slip-in bushing. This oil reduces wear and provides lubrication to prevent seizing
☼ Has a hardened steel pin which rides on the tensioner press for long life

This is a product of unmatched quality and will provide you with the peace of mind that your bracket will never fail. Many of the other tensioners on the market are made from weaker aluminum instead, or are cast steel instead of billet steel.

Looking to add some style and wake up that Crown a bit? XAT can make you a custom stainless exhaust! This would bolt directly to your factory 2 bolt cat and replace everything up to and including the muffler.

These are custom made to order, so we're able to make variations and changes to suit your tastes! Looking for a different style muffler? Single tip? Flat black? Let us know what you're looking for, and we can get you covered. 

Each exhaust is hand made on an actual JZS155 Crown, so fitment is sure to be right. Fits hardtops and sedans. Not compatible with JZS155 Majesta. Please note this exhaust is strictly for off road use only. Check your local laws before purchasing. Depending on what style muffler you are using, you may need to clearance your stock bumper cover. Open a dialog with us if youre looking to avoid this

Because of poor fitment of other manifold options on the market, we decided to develop a new exhaust manifold specifically for our JZS155 hardtop Crowns! This manifold puts the turbo in just the right position to not interfere with the throttle Y-pipe that goes over the engine, so you can retain the stock intake manifold still. Larger turbo setups may require further modifications, which you can expect with larger turbo setups anyways.

304 stainless steel, 2mm thick runners, 1 5/8" runner ID and a 3 year warranty!

Please note that while we try to keep the T4 version in stock, there may be a 4-6 week wait time for them to be custom made.

This fits 1JZGE VVTi heads, but not 1JZGE non-VVTi heads, which are unique and do not have an interchangeable bolt pattern. Turbo and turbo kit not included with this listing, but we can build you one!

Wastegate piping is included, however the base manifold does leave off the flange for you to weld the matching flange for your wastegate. We also keep in stock flanges for the most popular wastegates, so we can include and/or weld that up for you!

Price is for 2 package for 1 axle. If you need a set for the whole car, front AND rear, you will need to select that from the dropdown menu.

Fits nearly every Toyota car from the 80s, 90s, and 2000s. Excellent for upgrading to stronger, longer wheel studs, running spacers, etc. Stock length is ~1.75", these are 2.6"

Knurl: 0.559
Underhead Length: 2.600
Knurl Length: 0.180
Thread Pitch: 12mm x 1.5 

Is it...could it be?? The world's first JZS155 specific turbo kit?! OMG!

We're huge fans of the 10th generation Toyota Crown here at XAT, especially the hardtop version with pillarless windows..and yes, we have a few of these cars. This kit includes everything you need to turbo your 2JZ-GE VVTi in your RHD Crown--no steering rack, downpipe, manifold, or wastegate issues here!

Our kit has been developed entirely in house on one of our own JZS155 Crowns, specifically for 2JZ Crowns. Please note we cannot guarantee fitment on the Crown Majesta JZS155, as those are based off of the GS/Aristo JZS155 chassis, and might have slight differences in fitment. We have a customer making 558rwhp on this exact kit and bone stock internals!!

Some of the many benefits of the "zenki" 95 to mid-97 Crowns are that they still have the same rods as the turbo 2JZGTE, cable throttle, and no MAF! An ECUMasters DET3 and some injectors will easily get you to 500+ HP!!

The intercooler is rated for 700 HP, which is more than the turbo is capable of. So if you wanted to upgrade the turbo down the line, you still have room to do so. This kit is specifically built to make a mean street car with a very responsive turbo.

The intercooler will replace your factory crash bar behind the bumper cover. There's only some minor clearancing recommended just below the stock grill (which is not visible with the bumper cover installed). We also weld a 90* compressor outlet elbow (included with the kit) directly to the turbo to make installation a very straightforward, bolt on install! The factory bumper cover does NOT need to be cut/modified, and the intercooler fits nicely between the frame rails! We're big fans of this style for that sleeper look. You may also need to move/bend the lines going from the auto trans to the radiator, if you still have an auto trans.

The base kit does include a BOV, though we also offer better options. Whichever route you go with, we weld the BOV on the cold side piping for you that matches your blow off valve selection.

We use these on all of our imported Crowns!

When it comes to spark plug wires, NGK is the biggest and best in the industry. Normal recommended replacement is 60,000 miles, so get the strongest spark on your engine. Pick up gas mileage, power, and a healthier throttle response with this easy service replacement.

Please make sure you select the correct engine fitment from the dropdown menu. If you have a distributor on your engine, you will need the non-VVTi option.

Typically ships within a few days!

Overview

With over 10 years of Research and Development into Supercharging the Toyota 1UZ-FE V8 engine, Bullet Cars is widely known as the Industry leader in this field.

The Bullet Supercharger kit to suit the Toyota Soarer/Lexus LS400 is a true OEM style kit that enhances the performance of these vehicles. Based around the popular Eaton M90 positive displacement Supercharger which delivers maximum boost from ‘off idle’ all the way to the redline, the kit provides maximum torque at lower engine speeds whilst retaining the factory driveabilty and smoothness. The new Bullet High flow cast manifold has the provision for the factory cold start injector and the idle control stepper motor
Depending on the kit and other ancillaries, power levels can be increased up to 90% over standard.

Please note there will be a considerable wait time as the M90 rotating parts have to be sourced independently and are not available new anymore from Eaton. Please reach out to us before ordering

Benefits

• Bullet’s world renowned cast intake manifold with removable top plate
• High Efficiency M90 positive displacement supercharger
• Cold Start Injector and Idle control valve provision
• OEM style installation
• Fits under standard Soarer bonnet
• 5.5 Psi boost level for standard kit
• Power in excess of 175KW at the wheels , up from 120KW stock.
• Will work with factory computer system (Rising rate fuel regulator recommended)

Parts Included

• Eaton M90 Positive Displacement Supercharger with bolt-on pulley
• Bullet High Flow Cast Intake Manifold with removable CNC cut top plate
• Bullet High Flow Cast Rear Intake manifold with idle air control valve provision
• External bypass valve
• Idler Bearing with mount
• Engine and Supercharger 6PK Drive Belt
• New intake manifold gaskets, nuts, bolts, hoses, O-rings and clamps
• New bottom Injector seals
• Air Intake hoses and adaptor
• Rising rate fuel regulator (optional)
• Comprehensive Installation Instructions

Please note the optional intercooler kit is NOT a complete kit. You will need to plumb the lines up to a heat exchanger, which will depend on your chassis/setup.

Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

This kit is specifically designed to use MkIV Supra TT rotors, meaning you only need 17" wheels to clear these brakes, giving an extra option for those looking to keep with period correct wheels and wheel sizes. Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

This listing includes everything needed for 100% bolt on operation! These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

As seen in the above picture, the full weight of the caliper, rotor, pads, and mounting hardware comes to 28.25 lbs!

The steering arm and caliper may need to be modified on your setup to fit this brake kit, depending on application, if youre not using an angle kit. This had to be done on our zenki '89-92 UCF10 Celsior to fit, as well as our '96 Crown JZS155. Expect similar requirements on X90s and early X100s, likely on GS/Aristo as well.

Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

This kit is specifically designed to use MkIV Supra TT rotors and is meant to match the front kit we also sell! Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

This listing includes the brackets and hardware to mount. We give the option of piecing together the rest of the kit yourself, otherwise you will need all of the dropdown menu options for 100% bolt on. These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

Caliper, mounting bracket, pads, and rotor weigh a combined total of 21.6 lbs

IMPORTANT: because of the size of the internal drum e-brake these cars have, you WILL LOSE E-BRAKE capability unless switching to the Project Mu shoes or a 2nd caliper setup.

Brackets fit:

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)

With minor knuckle modifications (see last pictures above), the brackets also fit:

☼ 1992-1999 Majesta 2WD (JZS155 2JZ, UZS151, UZS157 1UZ), and 140 series (JZS147, JZS149, UZS141, 143, 147)

☼ 1991-1997 Aristo / GS300 (JZS147)

☼ 1991-2000 Soarer (JZZ30/31 1JZGTE/2JZGE, UZZ31 1UZFE) / SC300 (JZZ31 2JZGE) / SC400 (UZZ30, 1UZFE)

And possibly others! We have not confirmed fitment on any other chassis/vehicle.

JE Pistons opened its doors for business in 1947 with one simple objective, to supply the racing community with the highest quality pistons and components available in the marketplace. Although times, people and equipment have changed, their objectives and goals have remained constant. Today, JE is the largest manufacturer of custom forged racing pistons in the world. Offering the shortest lead times in the industry and a 98% order fill rate, JE is the definitive source for all of your high performance needs.

The JE complex encompasses the most modern performance piston manufacturing equipment in the industry. JE’s implementation of the most advanced CNC machining technologies available, emphasizes their commitment to deliver the highest quality pistons, pins, rings and components available today. Industry leading processes like Ultra Crown®‚ a digital three-dimensional piston crown machining process, and Ultra Groove®‚ a machining operation that provides unprecedented flatness of ring grooves (tolerances to within millionths of an inch), are some examples of that commitment.

JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Features: Dome/Dish requires no deburring or preparation and feature smooth flowing radii for excellent flame travel. Pin fitting, wire locks, and rings included.

Please contact us for availability on your specific needs, so you can plan your build accordingly!

Wiseco has long been a terrific affordable option for engine building. Although not as expensive as their CP and JE competitors, theyre still quite capable of making big power reliably!

If your build has custom considerations, please reach out and we will be happy to work out what you need!

Please contact us for availability on your specific needs, so you can plan your build accordingly!

Pauter Billet 4340 X-Beam Connecting rods for the Toyota/Lexus infamous 1JZ or 2JZ engines are precision CNC-machined from the finest 4340 forgings available. Each rod is heat-treated to Rockwell C36 and then full-coverage shotpeened. The rods are then end to end balanced in sets and then final sized on the big and small ends. Each rod comes standard with ARP 2000 bolts rated at 220,000 psi tensile strength and aluminum-bronze wrist pin bushing. Each set comes complete with (6) rods and (12) rod bolts. Good for over 200 HP per rod!

PLEASE NOTE THESE TYPICALLY TAKE 8-10+ WEEKS TO SHIP OUT, AND PLAN ACCORDINGLY!

Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

This kit is specifically designed to use MkIV Supra TT rotors and is meant to match the front kit we also sell! As seen from the picture above, the full kit with pads, rotor, caliper, and mounting hardware weigh a total of 21.6 lbs.

This listing includes everything you need to bolt on the full Wilwood kit that we offer to the rear: 

• Wilwood FSL Calipers Grey Anodized
• Wilwood BP10 Race/Street Pads
• Wilwood Stainless Braided Brake Lines
• Rotors, your choice of blank, drilled, slotted, or drilled and slotted
• XAT mounting brackets and hardware
• Project Mu D1 Spec e-brake shoes

This kit fits:

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

☼ 1995-2001 Toyota Crown JZS155 (2JZ-GE), GS151 (1G-FE), JZS151 (1JZ-GE)

With minor knuckle modifications (see last pictures above), the brackets also fit:

☼ 1992-1999 Majesta 2WD (JZS155 2JZ, UZS151, UZS157 1UZ), and 140 series (JZS147, JZS149, UZS141, 143, 147)

☼ 1991-1997 Aristo / GS300 (JZS147)

☼ 1991-2000 Soarer (JZZ30/31 1JZGTE/2JZGE, UZZ31 1UZFE) / SC300 (JZZ31 2JZGE) / SC400 (UZZ30, 1UZFE)

And possibly others! We have not confirmed fitment on any other chassis/vehicle.

Overview

Breathtaking performance with ultra high efficiency – Bullet’s world first High boost upgrade for the 1UZ-FE utilizing the HTV1900 Supercharger.

Forget the M90 or M112, this is the Supercharger to have nestled confidently on your engine. This kit has been developed to meet the needs of those 1UZ VVTi and 3UZ owners chasing a real world 250kws+ at the wheels. The Harrop HTV1900 is a Roots-type supercharger manufactured utilizing the latest Eaton TVS (Twin Vortices Series) rotating assembly. The Eaton TVS rotating assembly features twin four-lobe rotors, twisted 160 degrees. By comparison, the original Eaton superchargers (for example – the M90) features three lobes twisted 60 degrees. The fourth lobe and added twist, when combined with redesigned air inlet and outlet ports, creates a smoother, more efficient flow of air into the engine. In addition to improved overall efficiency, the Eaton TVS supercharger has improved noise and vibration characteristics as well.

The HTV1900 kit is a true OEM style kit utilizing the renowned Bullet High Flow cast intake manifold. From the CNC cut top plate to the unique Bullet high flow rear entry, the Bullet kit is unrivalled in engineering precision and product development. The HTV1900 delivers maximum boost from ‘off idle’ all the way to the redline, maximum torque at lower engine speeds and drastically reduced air intake temperatures when compared to the M90 and M112. The HTV1900 can support boost levels in excess of 15psi and with the increase in efficiency, produces unlimited high rpm power that easily outperforms any other 1UZ positive displacement Supercharger kit on the market. Guaranteed.

For maximum gains, Bullet recommends a complete standalone engine management system to take full advantage of this Supercharger’s potential.

Forget the M90 or M112, the HTV2300 is the Supercharger to have nestled confidently on your engine. This kit has been developed to meet the needs of those 1UZ VVTi/3UZ owners chasing a real world 250kws+ at the wheels. The Harrop HTV2300 is a Roots-type supercharger manufactured utilizing the latest Eaton TVS (Twin Vortices Series) rotating assembly. The Eaton TVS rotating assembly features twin four-lobe rotors, twisted 160 degrees. By comparison, the original Eaton superchargers (for example – the M90) features three lobes twisted 60 degrees. The fourth lobe and added twist, when combined with redesigned air inlet and outlet ports, creates a smoother, more efficient flow of air into the engine. In addition to improved overall efficiency, the Eaton TVS supercharger has improved noise and vibration characteristics as well.

The HTV2300 kit is a true OEM style kit utilizing the renowned Bullet High Flow cast intake manifold. From the CNC cut top plate to the unique Bullet high flow rear entry, the Bullet kit is unrivalled in engineering precision and product development. The HTV2300 delivers maximum boost from ‘off idle’ all the way to the redline, maximum torque at lower engine speeds and drastically reduced air intake temperatures when compared to the M90 and M112. The HTV2300 can support boost levels in excess of 15psi and with the increase in efficiency, produces unlimited high rpm power that easily outperforms any other 1UZ positive displacement Supercharger kit on the market. Guaranteed.

For maximum gains, Bullet recommends a complete standalone engine management system to take full advantage of this Supercharger’s potential.

Benefits

• Bullet’s world renowned cast intake manifold with removable top plate
• Ultra High Efficiency HTV1900 positive displacement supercharger (Stage 2 kits use HTV2300, recommended only for built engines)
• OEM style installation
• Fits under standard Soarer bonnet
• Capable of boost levels exceeding 15psi
• Power in excess of 300 rear wheel kilowatts with intercooler is possible.
• Ideal kit for forged internals

Parts Included

• Harrop HTV1900 Positive Displacement Supercharger and bolt-on pulley (Stage 2 kits use HTV2300, recommended only for built engines)
• Bullet High Flow Cast Intake Manifold with removable CNC machined top plate
• Bullet High Flow Cast Rear Intake manifold
• Internal Bypass Valve with optional interchangeable boost delivery system
• Idler Bearing with mounting boss
• Engine and Supercharger 6PK Drive Belt
• New intake manifold gaskets, nuts and bolts
• New bottom Injector seals
• Intake piping to air cleaner with Idle air control valve provision
• Comprehensive Installation Instructions

Recommendations

• Haltech or Link ECU wired in conjunction with factory ECU
• Bullet Water to Air Intercooler
• High Flow Denso Injectors
• Bullet Heavy Duty Belt Tensioner Kit

Please note the intercooler kit is NOT a complete kit. You will need to plumb the lines up to a heat exchanger, which will depend on your chassis/setup.

Please contact us for availability on the different rotor/caliper styles, as they go in and out of stock regularly!

We at XAT have developed an intermediary brake kit that slots just below the LS460 big brake kit that we sell! As we've discovered, the LS460 brake kit combo requires a minimum of 18" wheel, and some 18"s also will not fit. It's easy to recognize the fast growing popularity of JDM vehicles we grew up loving now being imported, as we have a hand in doing that as well!

This kit is specifically designed to use MkIV Supra TT rotors, meaning you only need 17" wheels to clear these brakes, giving an extra option for those looking to keep with period correct wheels and wheel sizes. Although we dont have a complete list of every wheel this kit will fit, if you suspect the LS460 kit may be too big for you, this is a terrific alternative, using OEM quality and Wilwood brand parts!

This listing includes the brackets and hardware to mount. We give the option of piecing together the rest of the kit yourself, otherwise you will need all of the dropdown menu options for 100% bolt on. These may not be legal for normal road use in your jurisdiction. We recommend checking before purchasing.

As seen in the above picture, the full weight of the caliper, rotor, pads, and mounting hardware comes to 28.25 lbs!

Wiseco has long been a terrific affordable option for engine building. Although not as expensive as their CP and JE competitors, theyre still quite capable of making big power reliably!

Asymmetric pistons have been slowly gaining popularity in the aftermarket world. The idea is that the skirt can be beefed up as necessary on the thrust side of the piston, but the trailing side does not need as much reinforcement. With this design, the piston can be made with less friction, which means more power and better mileage!

These pistons come with HD2 asymmetric skirts, lateral gas ports, and .200" wall wrist pins

Please contact us for availability on your specific needs, so you can plan your build accordingly!

Overview

Breathtaking performance with ultra high efficiency – Bullet’s world first High boost upgrade for the 1UZ-FE utilising the HTV1900 Supercharger.

Forget the M90 or M112, this is the Supercharger to have nestled confidently on your engine. This kit has been developed to meet the needs of those 1UZ owners chasing a real world 250kws+ at the wheels. The Harrop HTV1900 is a Roots-type supercharger manufactured utilizing the latest Eaton TVS (Twin Vortices Series) rotating assembly. The Eaton TVS rotating assembly features twin four-lobe rotors, twisted 160 degrees. By comparison, the original Eaton superchargers (for example – the M90) features three lobes twisted 60 degrees. The fourth lobe and added twist, when combined with redesigned air inlet and outlet ports, creates a smoother, more efficient flow of air into the engine. In addition to improved overall efficiency, the Eaton TVS supercharger has improved noise and vibration characteristics as well.

The HTV1900 kit is a true OEM style kit utilizing the renowned Bullet High Flow cast intake manifold. From the CNC cut top plate to the unique Bullet high flow rear entry, the Bullet kit is unrivalled in engineering precision and product development. The HTV1900 delivers maximum boost from ‘off idle’ all the way to the redline, maximum torque at lower engine speeds and drastically reduced air intake temperatures when compared to the M90 and M112. The HTV1900 can support boost levels in excess of 15psi and with the increase in efficiency, produces unlimited high rpm power that easily outperforms any other 1UZ positive displacement Supercharger kit on the market. Guaranteed.

For maximum gains, Bullet recommends a complete standalone engine management system to take full advantage of this Supercharger’s potential.

Forget the M90 or M112, the HTV2300 is the Supercharger to have nestled confidently on your engine. This kit has been developed to meet the needs of those 1UZ owners chasing a real world 250kws+ at the wheels. The Harrop HTV2300 is a Roots-type supercharger manufactured utilizing the latest Eaton TVS (Twin Vortices Series) rotating assembly. The Eaton TVS rotating assembly features twin four-lobe rotors, twisted 160 degrees. By comparison, the original Eaton superchargers (for example – the M90) features three lobes twisted 60 degrees. The fourth lobe and added twist, when combined with redesigned air inlet and outlet ports, creates a smoother, more efficient flow of air into the engine. In addition to improved overall efficiency, the Eaton TVS supercharger has improved noise and vibration characteristics as well.

The HTV2300 kit is a true OEM style kit utilizing the renowned Bullet High Flow cast intake manifold. From the CNC cut top plate to the unique Bullet high flow rear entry, the Bullet kit is unrivalled in engineering precision and product development. The HTV2300 delivers maximum boost from ‘off idle’ all the way to the redline, maximum torque at lower engine speeds and drastically reduced air intake temperatures when compared to the M90 and M112. The HTV2300 can support boost levels in excess of 15psi and with the increase in efficiency, produces unlimited high rpm power that easily outperforms any other 1UZ positive displacement Supercharger kit on the market. Guaranteed.

For maximum gains, Bullet recommends a complete standalone engine management system to take full advantage of this Supercharger’s potential.

Benefits

• Bullet’s world renowned cast intake manifold with removable top plate
• Ultra High Efficiency HTV1900 positive displacement supercharger
• OEM style installation
• Fits under standard Soarer bonnet
• Capable of boost levels exceeding 15psi
• Power in excess of 300 rearwheel kilowatts with intercooler is possible.
• Ideal kit for forged internals

Parts Included

• Harrop HTV1900 Positive Displacement Supercharger and bolt-on pulley
• Bullet High Flow Cast Intake Manifold with removable CNC machined top plate
• Bullet High Flow Cast Rear Intake manifold
• Internal Bypass Valve with optional interchangeable boost delivery system
• Idler Bearing with mounting boss
• Engine and Supercharger 6PK Drive Belt
• New intake manifold gaskets, nuts and bolts
• New bottom Injector seals
• Intake piping to air cleaner with Idle air control valve provision
• Comprehensive Installation Instructions

Recommendations

• Haltech or Link ECU wired in conjunction with factory ECU
• Bullet Water to Air Intercooler
• High Flow Denso Injectors
• Bullet Heavy Duty Belt Tensioner Kit

Please note the optional intercooler kit is NOT a complete kit. You will need to plumb the lines up to a heat exchanger, which will depend on your chassis/setup.

Brackets are in stock and ready to ship!

You've asked for it, so here it is! At long last, a viable rear brake upgrade solution to go with our front LS460 brake option!!

This listing is for the full bolt on kit and includes:

• 2007-2018 Lexus LS460 rear calipers (A16 in the casting)
• 2007-2018 Lexus LS460 rear brake pads and hardware kit
• 1993-1998 Toyota Supra twin turbo rear rotors
• Adapter brackets and mount hardware
• Stainless braided brake lines
• Brake rotors
• Project Mu D1 Spec e-brake shoes

And that's it! You can reuse factory brake lines, though we strongly recommend going with stainless braided lines for your application. Our brackets include mounting hardware with every purchase.

Fits all S150 hardtops, S150 sedans, X90s, and X100s.

Brackets fit:

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE), LS151 (2L-TE)

Brackets are in stock and ready to ship!

You've asked for it, so here it is! At long last, a viable rear brake upgrade solution to go with our front LS460 brake option!!

With these adapter brackets, you will also need:

• 2007-2018 Lexus LS460 rear calipers (A16 in the casting)
• 2007-2018 Lexus LS460 rear brake pads and hardware kit
• 1993-1998 Toyota Supra twin turbo rear rotors

And that's it! You can reuse factory brake lines, though we strongly recommend going with stainless braided lines for your application. Our brackets include mounting hardware with every purchase.

Fits all S150 hardtops, S150 sedans, X90s, and X100s.

Brackets fit:

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE), LS151 (2L-TE)

IMPORTANT: because of the size of the internal drum e-brake these cars have, you WILL LOSE E-BRAKE capability with this kit. We are developing an independent hydraulic option to replace the factory cable, however if you use the Project Mu JZX100 to MkIV Supra e-brake shoes, you should be able to retain hand brake capability.

After the surprise success of our 2GS/SC430 brake adapters, we've started development on an IS300 version as well! These brackets let you bolt on 4 piston LS460 calipers to your IS300 / Altezza, making an inexpensive but VERY effective brake update option! Thanks to Toyota parts interchangeability, that means they also fit Chaser, Cresta, Crown, Mark 2, Progres, and Verossa chassis'!

In our continuing support of Lexus performance products and the UZ platform, we have finished this set of brackets to mount 4 piston LS460 / LS600h brake calipers to any USDM IS300 2000-2005!

These brackets are ideal for those DIYers that are looking for an inexpensive option for brake upgrades. You keep your factory brake lines in this bolt-on solution; all you need is a set of front 2007-2018 LS460, LS460L, LS500, or LS600h fixed 4 piston brake calipers, LS460 fitment pads, and a set of 2008-2014 IS-F14" rotors!

Although the roll center adjusters aren't mandatory, they provide a bolt on solution. You do not have to run them, though if you do not, you may need to modify the mounting hardware. They will improve the suspension geometry on lowered cars at any rate, so we highly recommend them.

Please note that the LS460 does NOT use 5x114.3 rotors, so you will NOT be able to bolt on the LS460 rotor. We do not have fitment confirmation on the larger LS460 F-Sport 6 piston Brembo brakes, though they may also fit when used with larger rotors.

Additionally, you will most likely need 18" wheels to fit over these. The only 18s we have found to not fit so far are some Enkei RPF1s and IS250/IS350 F Sport front wheels. We cannot make any promises on what else will not fit, however every other 18" wheel we have tried does fit over these brakes, including factory X-Runner wheels, Enkei NT03+, G35 Ray's wheels, etc.

Please also note these will fit the S150 series hardtop Crown, not the Crown Majesta. The Majesta JZS155 will use our GS300 adapter brackets

Brackets fit:

☼ 2001-2005 Lexus IS300 / Toyota Altezza JCE10, GXE10, SXE10

☼ 1992-2001 Toyota Chaser / Cresta / Mark II GX100 (1G-FE), JZX100 (1JZ-GE, 1JZ-GTE), JZX101 (2JZ-GE), SX100 (4S-FE), GX90, SX90, JZX90, JZX91, LX90, LX100

☼ 2000-2004 Toyota Mark II GX110 (1G-FE), JZX110 (1JZ-GTE, 1JZ-FSE)

☼ 1995-2001 Toyota Crown GS151 (1G-FE), JZS151 (1JZ-GE), JZS155 (2JZ-GE)

☼ 2000-2003 Toyota Crown GS171 (1G-FE), JZS175 (2JZ-FSE), JZS171 (1JZ-FSE, 1JZ-GTE), LS151

☼ 1999-2007 Toyota Crown JZS175 (2JZ-GE, 2JZ-FSE)

☼ 2001-2007 Toyota Progres JCG10 (1JZ-FSE), JCG11 (2JZ-FSE)

☼ 2001-2004 Toyota Verossa GX110 (1G-FE), JZX110 (1JZ-FSE, 1JZGTE)

☼ 2000-2001 Toyota Origin JCG17

And possibly others!

You will receive 1 pair of brackets to mount both front calipers, as well as mounting hardware. Please note that we normally stock the brackets and rotors, however it may take 1 week to ship the calipers. Please note that free shipping is for the continental US 48 states only

Pictures show the RWD K17 type caliper being used. The AWD N18 caliper has the same bolt pattern, but the caliper sits taller on the rotor. As such, the N18 version will not work with the IS-F rotor. You'll need to stick to the K17 type. We do not support the N18 caliper, so you will need to verify before installation. We also sell the K17 calipers brand new for a very affordable rate!

Keep in mind these are designed for off road use only and professional installation is required. We have been driving on these kits for over 3 years, but use at your own risk.

These are the BRAND NEW OEM TOYOTA rubber seals for under your valve covers. Sold in a set of 2, for 1 complete engine.

Don't forget the rubber washers for the valve cover bolts! The earlier engines also sealed up around the bolt heads using rubber washers, so you'll want to replace those at the same time

WE HAVE COMPLETION!! First batch of cams have been completed. These are not simply overpriced regrinds of stock cams. There are machined from new billet cores.

These cams will be for anyone looking to get the most out of their Lexus GS460, LS460, Toyota Crown Majesta etc. with the 1URFSE engine or LS600h with the 2UR-FSE (not the GSE in the F cars--RC-F, GS-F, LC500, etc). THESE ARE NOT MEANT FOR THE 1UR-FE TRUCK ENGINE IN THE TUNDRA, GX460, ETC.

If you've already done basic mods like intake, exhaust, and tune, this is the logical next step for you to have some noticeable gains, however you can expect to need at least an upgraded valvetrain to run these.

For the manufacturing process, we start with proprietary cast iron billets, CNC machine the lobes, and finish off with double heat treatment, 5160 induction hardening, and Tufftriding.

Pictured is one set from the actual run of UR cams made!! We have just a few sets left in stock, as these are low production numbers. Once they leave, there may be a few weeks wait time before we get more in

Cam specs for XAT cams:
294 duration, 7.17 cam lift intake, 245 duration at .050"
300 duration, 7.17 cam lift exhaust, 247 duration at .050"

With the factory rocker ratio, that's 10.76mm of valve lift with our cams! As such, you should verify clearance with your pistons and these cams. In most cases, you may need custom pistons.

APPLICATION:: 2JZGTE engine (all). Standard bore, .020", 040" (86.0, 86.5, 87.0 bores). 2JZGE (non-turbo) ALL. Standard bore,.020", .040" (86, 86.5, 87.0mm bores).

We have done it again! Since 2009 XAT has worked to bring into service the much desired 4-piece metal head gasket for the 2JZGTE engine with a true STOPPER layer. As you know the factory 2JZ head gasket is quite robust, but there is nothing that holds boost like the STOPPER designs. The problem has always been that GReddy and HKS had a lock on this market and could charge what they want! We've been using this gasket in every 2JZ engine we've build for over a decade

NOT ANY LONGER! We have available immediately modern 4-Layer Metal Head Gaskets 1.3mm thick with the proven STOPPER layer at an affordable price, and NOT made in an Asian country!

Explanation for the difference between the 3-layer version, and this 4-layer, and the advantages. The 4 layer version allows for thinner layers, far improving heat dissipation as there are more layers to absorb the heat. Rigidity, durability and thermal transfer characteristics far exceed standard MLS head gaskets.

How does the STOPPER layer work? The stainless steel .015mm thick STOPPER layer features a precision "fold" which encircles the cylinders creating an additional load point for the combustion chambers. In English??? The STOPPER layers STOPS combustion gasses from escaping in the best means possible, period!

What about the top and bottom layers? They are active control layers are micro-embosses pre-coated steel that micro-seal engine fluids at the most disciplined level possible.

The center layer? Made out of steel, precision manufactured with the main purpose to set an accurate overall thickness tolerance for the entire gasket. This ensures even distribution of pressure in the most accurate means possible.

XAT multi layer steel 1.3mm 2JZGE or 2JZGTE Head Gasket

1.3mm Thickness

4 Layer Stopper Specification Version

87.0mm Bore (works with all bores from 86mm to 87mm)

7.73cc Volume per Cylinder

Our head gasket is being used by major 2JZ engine builders all over the USA, Middle East, Australia, South Africa, UK, Canada, New Zealand and even in the former Soviet States and in many nations in Europe!! Used on the ProShop 8.1 second drag Supra out of Abu Dhabi, as well as multiple other 8 second cars worldwide!

The very same line we are using in our custom 2JZ-GE Crown JZS155 turbo kits! This will fit all JZ engines receiving boost for the first time and supplies the turbo of your choice with much needed oil.

-3 or -4 feed , sandwich adapter plate, simple and effective.

The optional drain line kit we supply is premade for a rear sump oil pan. If you have a front sump pan (JZS155 Crown, IS300/Altezza, Aristo/GS300), you will need to shorten the drain line and use the hose end we supply to have proper fitment with it.